1 / 2
AnyCubic S1 Kobra Waste "Poop" Chute — zdjęcie 1
1 / 2

AnyCubic S1 Kobra Waste "Poop" Chute

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Extra long, left side, easy to remove waste chute for Kobra S1.

Ocena
5 / 5
Polubienia
17
Pobrania
320
Wydruki
2
Wyświetlenia
2112
Oceny
2

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

The waste chute is extra long for a waste bin on the left side of the printer. It was designed to be easily installed and removed without needing to fully unscrew it. I have my printer against a wall and the chute going behind a desk, so I have to remove it in order to pull it out. It was modeled a bit thick to make it durable and less prone to breaking. The chute passes in front of the carbon exhaust vent, but I rarely use the exhaust and it is not completely blocked.

The chute protrudes 105mm from the left side of the printer with a 20 degree slope.

Printed in PETG with 0.28mm layer height on AnyCubic Kobra S1. Modeled with OnShape.

Tagi