Qidi Plus 4 Poop Chute & Bin
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Qidi tech Plus 4 printer Poop chute to route the excrement to the right side of the printer into a bin (long way around)
- Ocena
- 4,5 / 5
- Polubienia
- 35
- Pobrania
- 310
- Wydruki
- 1
- Wyświetlenia
- 2435
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Didn't see anyone with a poop chute that went around the Qidi Plus 4 yet. So I decided to slap one together. By no means is this one the best design, but maybe it's a good start for someone to remix? It's not perfect and there are definitely issues, especially with it going the long way around. But that is how it fits in my workspace.
I designed it to use the existing screws around the chute for mounting it to the printer and with slots for small magnets to snap the bin to the chute extension for easy emptying.
I printed it with qidi slicer 0.24mm layer height “Draft” and Generic PLA settings. Manually painted supports over the mounting fins. The supports were on the organic Auto, slim, setting over bed only.
The chute and bin can be printed whole but separately on the qidi plus 4 build plate, but it is a tight fit. I used the auto-arrange, allowing rotation, to do get it to fit and set it to print on the top wall as seen the photo of the build plate.