1 / 2
minimal x endstop and purge chute/wiper for ender 3 v3 k3 or se with x linear rail for mmu — zdjęcie 1
1 / 2

minimal x endstop and purge chute/wiper for ender 3 v3 k3 or se with x linear rail for mmu

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

minimal x endstop and purge chute/wiper for ender 3 v3 k3 or se with x linear rail for mmu purging

Ocena
5 / 5
Polubienia
7
Pobrania
32
Wydruki
0
Wyświetlenia
377
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Share Alike

FOR ENDER 3 V3 SE, THIS MOD IS INTENDED TO BE USED ONLY WITH THE X AXIS LINEAR RAIL MOD BY ben

choose the correct one for the hotend you are using

requierd hardware:
original M4 countersink screw
M2x10 self tapping screws (4p) (filament might also works but requires glue)
4x2mm ptfe tube cut to 10mm (2p)
aluminium/copper tape

pla is fine

all settings are preapplied in the .3mf files

if you are using the M2 screws, they do not need to screw all the way in, only enough to be tight against eachother (like in the picture)

after all supports are removed, cover the chute part with aluminium/copper tape. if fillament still sticks to it when purging cover the problematic point with more tape

in printer.cfg, you need to change in [stepper_x] the folowing fields to -9 (or check by yourself):
position_endstop
position_min

Tagi