1 / 1
Voron frame support for 2020 extrusion with 3mm bolts — zdjęcie 1

Voron frame support for 2020 extrusion with 3mm bolts

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Supports for the frame that uses 3mm bots.

Ocena
0 / 5
Polubienia
5
Pobrania
29
Wydruki
0
Wyświetlenia
211
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution

Most of the other supports use 5mm bolts and I only had 3mm bolts. Also I'm using the “Hidden cable routing z belt cover” so it needed to fit with those too (visible in the picture).

I added 10 of these to my Voron 2.4 350mm, which made it must sturdier! You cannot add these to every corner as they would hit the gantry.

Tagi