Subaru Outback (Gen 6) Cargo Area Light Upgrades
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A Revision of the light upgrade by Justin Lamply with a black frame and transparent lens.
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 12
- Wydruki
- 0
- Wyświetlenia
- 370
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
A revision of the light upgrade by Justin Lamply with a black frame and transparent lens. Rear unit also converted to star board. Both parts are connected with a drop of superglue. Lenses needs support.
update:
After I was unable to connect the additional LEDs to the existing interior light circuit, a completely autonomous solution was implemented.
Since the existing interior light control is faded out via a PWM signal, I couldn't get a relay or optocoupler to work. As a solution, a Meanwell LED driver was permanently connected to a cable located in the trunk lid plus 12V line (pink) and ground.
Power led in series with led out. The controller has a standby pin which, when pulled to ground, deactivates the module. This runs via a reed contact in the right door panel.