Subaru Outback (Gen 6) Cargo Area Light Upgrades
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A Revision of the light upgrade by Justin Lamply with a black frame and transparent lens.
- Rating
- 0 / 5
- Likes
- 8
- Downloads
- 12
- Makes
- 0
- Views
- 372
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
A revision of the light upgrade by Justin Lamply with a black frame and transparent lens. Rear unit also converted to star board. Both parts are connected with a drop of superglue. Lenses needs support.
update:
After I was unable to connect the additional LEDs to the existing interior light circuit, a completely autonomous solution was implemented.
Since the existing interior light control is faded out via a PWM signal, I couldn't get a relay or optocoupler to work. As a solution, a Meanwell LED driver was permanently connected to a cable located in the trunk lid plus 12V line (pink) and ground.
Power led in series with led out. The controller has a standby pin which, when pulled to ground, deactivates the module. This runs via a reed contact in the right door panel.