SD-Card Slider Case
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Slim case for 6 SD and 6 MicroSD cards.
- Ocena
- 5 / 5
- Polubienia
- 3
- Pobrania
- 45
- Wydruki
- 0
- Wyświetlenia
- 386
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
This is my sliding case for SD cards. it is doublesided with lids labeled "Full" and “Ready For Use”. There is a blank lid for those that wish.
I wanted a slim case for my camerabag with 2 compartments to be able to separate the empty cards from the full ones. So I designed this slim sliding case that measures 12.8x34.8x132mm.
There is 3 versions of the sliding lids with different labels,
Ready for use, Full and a blank version.
This model does require assembly and glue is required For gluing the middle parts together to form the doublesided housing.
I used Loctite Super Glue Gel. wich I found works well with PLA.
During assembly of the housing I recommend using 2 short pieces of 1.75mm filament in the guide holes for east alignment.
Hardware needed
1x Socketcap M3x30
1x Spring L25mm x ID3,4mm x OD4,3mm (you can easily find this in an old pen)