SV06 and Plus horizontal COB LED holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A horizontal COB LED holder for the SOVOL SV06 and Plus.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 25
- Wydruki
- 1
- Wyświetlenia
- 142
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I took Avel's nice LED mount and modified it to have a horizontal channel so you can put a small COB LED and rolled it 90 degrees so it was not in the way. I spliced it off the constant 24v that feeds the 4010 blower fan since my other open port is in use by my filament runout sensor.
v2 - Moved the spot for the led to underneath the screw mounts for a cleaner look as well as adding walls to the front and right side to prevent camera glare.
Things you need:
A small bit of 24v 5mm COB LED (This is what I used https://a.co/d/ieh9sYd ).
2x M3x20mm screws to replace the ones from the extruder.
If you encounter flickering I would suggest running a direct line to it from the power supply (or a cheap 24v plug-in one) and down to it from inside the print head cable.