SV06 and Plus horizontal COB LED holder
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A horizontal COB LED holder for the SOVOL SV06 and Plus.
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 25
- Makes
- 1
- Views
- 144
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I took Avel's nice LED mount and modified it to have a horizontal channel so you can put a small COB LED and rolled it 90 degrees so it was not in the way. I spliced it off the constant 24v that feeds the 4010 blower fan since my other open port is in use by my filament runout sensor.
v2 - Moved the spot for the led to underneath the screw mounts for a cleaner look as well as adding walls to the front and right side to prevent camera glare.
Things you need:
A small bit of 24v 5mm COB LED (This is what I used https://a.co/d/ieh9sYd ).
2x M3x20mm screws to replace the ones from the extruder.
If you encounter flickering I would suggest running a direct line to it from the power supply (or a cheap 24v plug-in one) and down to it from inside the print head cable.