Bag Clip w/ 6x3mm magnet slot
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Includes a slot for a 6x3mm magnet in the "head" of the bag clip, so you can store in on the side of the frig or washer.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 22
- Wydruki
- 0
- Wyświetlenia
- 334
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution
This is a simple remix of the neoyarus clip adding a slot for a 6mm x 3mm magnet. You will need to pause the print in your slicer and add the magnet.* For me, that was layer 20 w/ .2mm layers on Prusa slicer.
You can get the magnets for under $10US on amazon, search for 6mm magnet. Take note of the height, as a 6x6 won't fit. This remix was done completely in the slicer using a cylinder. It should be easy to do your own if your magnets are a different size.
I printed it w/ PTEG and a .6mm nozzle.
* Note on pausing… there is a common problem that a pause command will not reheat the hot-end after the pause if you are using octoprint. I recommend using an SD card to print. (or if you search there are recommended fixes. I haven't tried them as it was easier to just use an SD card. )
Happy Printing.