1 / 5
Ender 3 direct drive mount + Cr Toutch NO SUPPORTS — zdjęcie 1
1 / 5

Ender 3 direct drive mount + Cr Toutch NO SUPPORTS

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Built from scratch in fusion. The model was made to fit the red metal dual gear extruder from aliexpress.

Ocena
0 / 5
Polubienia
1
Pobrania
33
Wydruki
0
Wyświetlenia
237
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial

Direct drive adapter for Ender 3  +  Crtoutch mount (optional for who doesnt have a metal one)

Made to fit only the dual gear red aluminium extruder, i dont think it fits the original plastic one as it is not adjustable. Before print make sure you have the metal one.

CR toutch mount made after the original

Printed at 0.20 mm layer height

infill user preference, i used 20%

Position the models as shown and dont use any support

If your printer cant print that overhang use supports. I used a k1 for this and had no isues without support even at those overhangs

Printed with ABS(use brimm) 245 - 260 with 4mm nozzle

 

Tagi