Sovol SV08: Bracket and cover LRS-350-24 Meanwell
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Bracket and cover LRS-350-24 Meanwell with additional fan for the bed heating PCB
- Ocena
- 0 / 5
- Polubienia
- 13
- Pobrania
- 62
- Wydruki
- 0
- Wyświetlenia
- 432
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
have replaced the original power supply unit with an LRS-350-24 Meanwell power supply unit. It is a bit too big, but a smaller one with 10 A was not available. The power supply unit holders are screwed to the 20x20 profiles. No changes to the housing of the SV08 are necessary. Only a few cable ties need to be removed.
Requires 2x bracket left, 1x bracket right, 1x bracket right rear.
You will need 4 M3 hammer nuts, 4 M3x10 screws, M3 nuts and 4 M4x10 screws.
The ventilation openings of the power supply unit also require a new cover. At the same time, I also installed a 4010 fan for the patine of the bed heater. The power supply is provided by a splitter from the mainboard fan.