Sovol SV08: Bracket and cover LRS-350-24 Meanwell
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Bracket and cover LRS-350-24 Meanwell with additional fan for the bed heating PCB
- Rating
- 0 / 5
- Likes
- 13
- Downloads
- 62
- Makes
- 0
- Views
- 432
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
have replaced the original power supply unit with an LRS-350-24 Meanwell power supply unit. It is a bit too big, but a smaller one with 10 A was not available. The power supply unit holders are screwed to the 20x20 profiles. No changes to the housing of the SV08 are necessary. Only a few cable ties need to be removed.
Requires 2x bracket left, 1x bracket right, 1x bracket right rear.
You will need 4 M3 hammer nuts, 4 M3x10 screws, M3 nuts and 4 M4x10 screws.
The ventilation openings of the power supply unit also require a new cover. At the same time, I also installed a 4010 fan for the patine of the bed heater. The power supply is provided by a splitter from the mainboard fan.