Lumica Penlight Clear End Piece/Diffuser
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Replacement end piece for Lumiace Omega 2
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 19
- Wydruki
- 0
- Wyświetlenia
- 81
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a replica of the Lumiace Omega 2 (Lumica G29794) clear end piece that screws on to the base like the original.
This model is designed to be printed in vase mode. I had success using clear VOXELPETG+ with the following settings:
- 0.6mm Nozzle
- 0.2mm Layer Height
- 1.0mm External Perimeter Width
- 10 solid bottom layers (2.0mm total)
Note that this print will take longer than expected to finish (1h 20min @15mm/s for me) because of the model's small circumference. Feel free to tweak your settings but keep in mind that PETG has optimal inter-layer adhesion when allowed to cool slowly.
Also included is a template to make light diffuser inserts out of printer paper. Make sure to print it with fit-to-page turned off!