Liczymy pasujące modele…
Compact reaper statue holding a stylized scythe fused into the body. Chunky safe proportions, one solid model for 3D printing. Model was tested in Orca Slicer for printability. Just scale it up to reach the desired size.
Idol of Viking Sorcerer/Chieftain channeling protective magic through his beard
I printed this crouched Cthulhu idol in marble PLA, and I’m blown away by how well the stone-like finish hides layer lines. The design captures the ancient, weathered feeling of a statue that’s been buried for ten thousand years and just…
The idol of the Amlash type is abstract and stylized, and its oversized thighs are particularly striking. Breasts mark it as feminine. It shows influences of the Mesopotamian advanced cultures in the south and the steppe art of the north.…
This is a support for the idole perfume of 50ml makes it harder for it to tip over
I used an AI image generator to create my interpretation of the Cthulhu Idol as described in the book 'The Call of Cthulhu'. I then used Meshy3D to convert that into an STL, and then refined the STL in Tinkercad and SculptGL. Warning! I…
Meridol toothpaste refilling tool designed for travel size 20ml and 75ml tube (EU version available in CZ,SK,HU). No waste and clean refill process. My printing setup: Material: Prusament PLA Nozzle diameter: 0.4 mm Layer height: 0.1mm…
Curraprox BE YOU 10ml toothpaste refilling tool. Designed to refill with Meridol 20ml or 75ml tube (EU version available in CZ,SK,HU). No waste and clean refill process. My printing setup: Material: Prusament PLA Nozzle diameter: 0.4 mm…
Have you lost the precious holder for your PT1000 temperature sensor and don't want to spend 120 EUR for a new one? Just print this small adapter and you will be fine! It fits rods of up to 14mm (the largest one I had in lab) and fits an…
This was a remix to create a Rogue Idol of the Greenskin Gods. (Feel free to leave a tip if you think it is merited :) OCT 21 - Updated to Ver 1.15b to correct some issues that I never liked. Category: Creatures
The Great Old One will watch and guide everything you type, while slowly driving you mad. Unfortunately it was too small to carve Ph'nglui mglw'nafh Cthulhu R'lyeh wgah'nagl fhtagn in Ancient Enochian around the base.
Pareidolia card from Balatro : ) All credit to LocalThunk and Balatro for the design
This thermometer clamp is designed to attach the digital thermometer of a Heidolph heating plate at the tripod material in a laboratory fume hood. Printed best upside down with some support.
I give you, the Atavistic Idol Warlock helmet from Destiny 2. With so much sharp detail it took a great amount of hours to replicate this design. I personally have been wanting to print and paint one of these for quite some time so much…
I printed it in 1:2 scale in PLA but I think it's better to print it in resin to get more details
This is a part of our Gomorrah Idolaters project! Subscribe to our newsletter and get this model for free: https://www.dakkadakka.store/gomorrah-idolaters Kickstarter pre-launch page:…
The Chachapoyan Fertility Idol , more commonly referred to as the Golden Idol, is a fictitious artifact that appears in the opening sequence of the 1981 film Raiders of the Lost Ark, the first entry in the Indiana Jones franchise created…
I just took the Idol and added a hole through it for a string necklace. Category: Costume
The service department lost the neutral button cap for my Genesis G70. So I made my own. It is simply a 15mm square with 3mm fillets and 10mm legs and dimples to hold it. I added tom666's Chachapoyan Fertility Idol - Polygon Reduction to…
On connaît Johnny Hallyday, l’idole des jeunes … mais ce matin, c’est une autre légende qu’on découvre : Johnny, l’idole déjeune . Exit la Harley, place au haut-parleur transformé en tabouret de star. Exit le perfecto noir, place au…
Ganesh Chaturti 3d model. Supports required, 0.1mm for accurate print and best for details to shine.
I printed this crouched Cthulhu idol in marble PLA, and I’m blown away by how well the stone-like finish hides layer lines. The design captures the ancient, weathered feeling of a statue that’s been buried for ten thousand years and just…
Master Yoda as if he were carved into an ancient stone idol , featuring weathered textures, runic details, and a mystical base resembling temple ruins.
Anime-inspired spirit fox statue with flowing stylized tails shaped like smooth flames. The fox is sitting upright on a solid pedestal, designed in one piece without moving parts. Exaggerated anime eyes and markings enhance the design.…
Compact anime-inspired demon idol with stylized horns, glowing-style engraved patterns, and a squat sitting posture. One solid statue with no fragile parts, designed for safe 3D printing. Model was tested in Orca Slicer for printability.…
Anime-inspired winged guardian with stylized geometric wings curving into the base. Compact, thick shapes to prevent fragility. One solid design for 3D printing. Model was tested in Orca Slicer for printability. Just scale it up to reach…
Anime wolf statue with stylized fur shaped like fire, sitting proudly on a pedestal. Chunky, safe design with no thin elements. One solid printable model. Model was tested in Orca Slicer for printability. Just scale it up to reach the…
Compact anime-style bird statue with stylized flowing wings wrapped around its body, sitting on a pedestal. Chunky and printable as one solid model. Model was tested in Orca Slicer for printability. Just scale it up to reach the desired…
Steampunk owl statue with gear-shaped eyes and feather details made from plates. Rounded, thickened features with no fragile parts. One-piece printable design. Model was tested in Orca Slicer for printability. Just scale it up to reach…
Chunky golem statue designed with steampunk armor, gear joints (non-moving), and pipe details. Thick proportions, one solid printable model. Model was tested in Orca Slicer for printability. Just scale it up to reach the desired size.
Compact anime-inspired demon idol with stylized horns, glowing-style engraved patterns, and a squat sitting posture. One solid statue with no fragile parts, designed for safe 3D printing. Model was tested in Orca Slicer for printability.…
Compact gargoyle statue with exaggerated wings folded close to the body, perched on a stone pedestal. One-piece model designed for 3D printing. Model was tested in Orca Slicer for printability. Just scale it up to reach the desired size.
Futuristic cyberpunk mask with glowing-style engraved lines and vents, mounted on a pedestal. One solid printable piece. Model was tested in Orca Slicer for printability. Just scale it up to reach the desired size.
antasy golem statue with crystals fused into its back, sitting on a thick pedestal. Chunky and one-piece printable model Model was tested in Orca Slicer for printability. Just scale it up to reach the desired size.
Stylized fairy with short wings fused into the body, sitting on a flower pedestal. Thick, stable, one-piece model. Model was tested in Orca Slicer for printability. Just scale it up to reach the desired size.
Fantasy serpent coiled tightly around a vertical pillar. All fused into one solid statue optimized for 3D printing. Model was tested in Orca Slicer for printability. Just scale it up to reach the desired size.
A statue of a gothic angel with folded wings wrapped closely around the body. Chunky, one solid safe piece for 3D printing. Model was tested in Orca Slicer for printability. Just scale it up to reach the desired size.
Compact idol shaped like a hooded crypt keeper holding a lantern, all details fused tightly. Thick proportions, one-piece printable statue. Model was tested in Orca Slicer for printability. Just scale it up to reach the desired size.
Cyberpunk panther statue with angular armor plates and glowing-style engravings across the body. One solid safe piece for 3D printing. Model was tested in Orca Slicer for printability. Just scale it up to reach the desired size.
Fantasy phoenix statue with wings folded closely around the body, perched on a thick pedestal. One solid printable piece. Model was tested in Orca Slicer for printability. Just scale it up to reach the desired size.
A remix of the ntalekt's "Indiana Jones - Chachapoyan Fertility Idol" model that can now double as a piggy bank.
The case is a simple rectangular case that is designed to fit my XIDOL K5188 USB modem I bought from Tokopedia. The device seems to share the same dimension with UZ801 or other chinese USB modems. The “Zhihe-series LTE dongles” page from…
A vibrant keycap inspired by Hatsune Miku , the iconic virtual singer. Featuring her signature turquoise hair and cheerful expression, this design brings a touch of music, color, and energy to your keyboard. Perfect for Vocaloid fans and…
100x160mm sign, with art of an angry gravy boat shouting “Thou shalt not have any Gravy idols” Mesh and Solid (may print easier) models provided. Best with color switch above 1mm, as with included gcode. Pictured in Shadowbox Frames ,…
I just took the Idol and added a hole through it for a string necklace. Print instructions Category: Costume
The idol of the Amlash type is abstract and stylized, and its oversized thighs are particularly striking. Breasts mark it as feminine. It shows influences of the Mesopotamian advanced cultures in the south and the steppe art of the north.…
This is a support for the idole perfume of 50ml makes it harder for it to tip over
A powerful horned demon figure sitting in a calm lotus meditation pose. Designed as a fantasy display piece that looks awesome painted, weathered, or left clean as a statue. Works great as desk decor, a shelf collectible, or a tabletop…
Through out the 4 way mister and designed this looks much better
I used an AI image generator to create my interpretation of the Cthulhu Idol as described in the book 'The Call of Cthulhu'. I then used Meshy3D to convert that into an STL, and then refined the STL in Tinkercad and SculptGL. Warning! I…
Indiana Jones swapping the idol scene. Print the background and figure separately. Print the background first, adjusting to the size of your needs, then print the figure paying close attention to the size to fit your background. Adjust…
Design: A detailed bust of Lord Shiva (Adiyogi) featuring his signature crescent moon, dreadlocks, and a beaded necklace. • Base: A steady, circular stand with "Adiyogi" text, perfect for a desk or shelf. • Printing Tip: Use supports for…
# Abyssal Sea Serpent Idol An original sea serpent idol rising from a drowned altar, designed as a dramatic printable fantasy monster collectible. Category: Water, Ice & Abyss Creatures ## Files VIS-003_abyssal_sea_serpent_idol.3mf,…
# Drowned Moon Manta Idol An original abyssal manta idol with crescent fins and a moon tide pedestal, designed for collectible fantasy printing. Category: Water, Ice & Abyss Creatures ## Files…
Description: An adorable chibi miniature featuring Kotori Minami , captured in a cheerful idol performance pose with her microphone and signature green ribbon. Her energetic expression and classic school idol outfit bring her sweet…
Description: An adorable chibi miniature featuring Nico Yazawa in a playful and energetic idol pose. With her iconic twin tails, expressive wink, and cheerful personality, this figure perfectly captures the charm and fun spirit of one of…
Description: An adorable chibi miniature featuring Ruby Kurosawa , captured in a sweet and cheerful pose while holding a tiny heart. With her iconic twin tails, bright expression, and lovable personality, this figure perfectly brings her…
Scandinavian Idol Incense Flute Id set it in a shallow ramekin
This is my design at supporting the many OLED displays for RAMPS boards. This board supports .98" , 1.3", 1.5" and 2.42" OLED displays for Marlin. I have supplied both a Horizontal and Vertical mount/enclosure for each display type so…
Pedro Infante - The Greatest Idol of Mexico 3D printable model.
Wow does this game have an insert that needs an assist. This additional sets of trays adds holders for all the components which should also fit the cardboard ones, but are designed to hold the wooden tokens and kickstarter goodies. It's…
My goal was to hollow the model that it can be filled with sand to increase it's weight. Two version available: Split in 2 half for easy printing, but you have to accept the seam between the 2 parts. No matters if you exspect to post…
This old artefact figures the deity of an long forgotten civilisation. Many are the scholars and adventurers who went in search of it's origin, few return and none with there sanity unscathed. Sculpted with Blender. Print instructions…
I used the great work form Kubol https://www.thingiverse.com/thing:2086578 to make a tutorial for the german Make Magazin where I put a ESP32-Cam into it and use the face recognition to make actions (like opening a door or just light up…
This is a first player token for the board game Lost Ruins of Arnak. I scaled the amazing Chachapoyan Fertility Idol model by McKrats (with DIYGarage_SoCal / rorschach999's modifications) down to a height of 5 cm and then added a base so…
Moon Idol from c. 800–600 BC. This Idol was found in Ödenburg/Sopron, Hungary. Natural History Museum Vienna Very little post processing. Feet were leveled to surface. Minor smoothing and decimation.
Indiana Jones Chachapoyan Gold Fertility Idol Buddha
Quick remix I made of this model, just to add a base, from thingiverse.
Chachapoyan Fertility Idol aka Golden Idol from the Indian Jones movie Raiders of the Lost Ark (1981). Using Fusion 360 I was able to reduce the mesh by 75% without losing too much quality. PolyLite Silk Gold: https://amzn.to/46fmrag 1:1…
Billy Idol Band Sign As with most just resize to what you want and color if you have a color printer. I tried to keep the logo’s as original looking as I could, I made these for my wall not to sell & figured someone else might like one as…
Do you need to inspire a sense of doom if someone goes to move a door stop? Employ the ever helpful Indiana Jones Fertility Idol themed doorstop! This model prints in two parts. The statue itself is actually printed atop a stopper. It is…
Halterung für Heidolph EKT 3001 Fernsteuerung - 3.OG OC 12mm / 13mm = Klemmöffnung Klemmung funktioniert sehr gut!
I added some high frequency details like skin and stone to the original design, so it can be completely painted by drybrushing. For the paint job, i primed it black, then added some blue, green and light-blue paint with a lot of water so…
Originally published here: Horned Idol from Indiana Jones and The Fate of Atlantis by tato_713 - Thingiverse Did you find a lock to match my key? . The double meaning phrase of Klaus Kerner at the beginning of the game. This is the model…
Decorative Wall Stand for God Idols or Decorative items
For an easier time printing, sink the model down in your slicer so that the head isn't floating.
Pagan Idols of Lysa Hora Hill. This area has been home to various civilizations and religious practices over time, which have left their mark on this significant location. The Lysa Hora Hill is located in Ukraine's Carpathian Mountains,…
A polygonal model of an african tribal art inspiration. The print on the pictures was made with eSun Wood filament on a delta Kossel printer. Infill : 5% Support : No Raft : No Layer : 0.2mm
The original design is awesome and I printed one! However, one of the reasons that I built a Rostock Max v3 was to have a tall print volume. So, I composited the two part model into one (first STL file). I also noticed that the model is…
Golden Idol (The Case of the Golden Idol) The model is in cm, scale to 1000% to print The peg has no clearance. print at 940%. or try different scaling and the gem at 950% I always try to make a print of the games I like. Sadly there is…
Capsule container for coffe machine Desea, Idola and Voicy. Print it at 0,3mm height. Use supports only for orizontal plane (see pics). Print instructions Printer Brand: Prusa Printer: i3 MK3s+ Rafts: Doesn't Matter Supports: only from…
Have a look at all 3 tree ornaments: https://skfb.ly/orNCP The inspiration and 3D scan of the original: https://skfb.ly/onIST 3D model of a tree ornament based on the figure on a throne from Pazardzhik (Bulgaria) from the Neolithic Age,…
I just took the Idol and added a hole through it for a string necklace. Category: Costume
Want to access even more models not found here ? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: https://www.patreon.com/mz4250 or support me on Printables Clubs! Patrons have…
