Horga'hn Idol from Star Trek. Composite for Tall Printers
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The original design is awesome and I printed one! However, one of the reasons that I built a Rostock Max v3 was to…
- Ocena
- 5 / 5
- Polubienia
- 67
- Pobrania
- 495
- Wydruki
- 11
- Wyświetlenia
- 1345
- Oceny
- 10
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Props
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
The original design is awesome and I printed one! However, one of the reasons that I built a Rostock Max v3 was to have a tall print volume. So, I composited the two part model into one (first STL file). I also noticed that the model is smaller than the original prop so I scaled it up to 11.5 inches (291mm). Another issue that I ran into with the composite version is that the many, 250,000+, polygons cause many programs to choke, so I reduced the polygon count by 60% to around 100,000 polygons. I have not printed the reduced version, but it looks nearly identical when rendered.
Happy printing and may you find jamaharon!
Print Settings
Printer Brand:
SeeMeCNC
Printer:
Rostock MAX v3
Rafts:
Doesn't Matter
Supports:
Yes
Resolution:
0.5mm nozzle; 0.2mm layer height
Infill:
10% Triangles
Category: Props