Horga'hn Idol from Star Trek. Composite for Tall Printers
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
The original design is awesome and I printed one! However, one of the reasons that I built a Rostock Max v3 was to…
- Rating
- 5 / 5
- Likes
- 67
- Downloads
- 505
- Makes
- 11
- Views
- 1,366
- Reviews
- 10
Updated at source:
Model information
- Source
- Printables
- Category
- Props
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
The original design is awesome and I printed one! However, one of the reasons that I built a Rostock Max v3 was to have a tall print volume. So, I composited the two part model into one (first STL file). I also noticed that the model is smaller than the original prop so I scaled it up to 11.5 inches (291mm). Another issue that I ran into with the composite version is that the many, 250,000+, polygons cause many programs to choke, so I reduced the polygon count by 60% to around 100,000 polygons. I have not printed the reduced version, but it looks nearly identical when rendered.
Happy printing and may you find jamaharon!
Print Settings
Printer Brand:
SeeMeCNC
Printer:
Rostock MAX v3
Rafts:
Doesn't Matter
Supports:
Yes
Resolution:
0.5mm nozzle; 0.2mm layer height
Infill:
10% Triangles
Category: Props