Fertility Idol Remix
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
My goal was to hollow the model that it can be filled with sand to increase it's weight. Two version available: Split…
- Ocena
- 0 / 5
- Polubienia
- 12
- Pobrania
- 119
- Wydruki
- 0
- Wyświetlenia
- 699
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Props
- Licencja
- Creative Commons — Attribution
My goal was to hollow the model that it can be filled with sand to increase it's weight.
Two version available:
Split in 2 half for easy printing, but you have to accept the seam between the 2 parts. No matters if you exspect to post process the model.
Full hollow model but you have to choose a proper orientation and add custom supports in your slicer software
Also add a "Chachapoyan" style support
Print Settings
Resolution:
0.12 / 0.14
Infill:
20 / 25%
Filament: Eryone PLA Gold
Notes:
Print speed 30 / 40 mm/s.
Allow at least 2 days of printing time for a full scale model.
You have to print pins to center the 2 two half when assemblying, if you choose this version.
The same for the bottom filling plug for both version.
Category: Props