LaserPecker LP5 Hose Adapter for Air Purifier
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
An alternative adapter for the LaserPecker LP5 protective cover to be used with their air purifier
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 29
- Wydruki
- 0
- Wyświetlenia
- 313
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
!!! IMPORTANT NOTE !!!
This mod requires you to disconnect or (recommended) remove the hall-effect sensor which detects if the front cover is attached. This disables a security feature and you also have to enable the “Free Mode” option in LaserPecker Design Space (LDS) to be able to fire the laser without the cover attached.
Because I always use the LaserPecker LP5 with their air purifier, I wanted to get rid of the small, loud and always running fan of the standard protective cover.
- Remove the current fan and hall-effect sensor
(take care to not rip off the cable of the sensor) - Reuse the screws to screw on the adapter
- Enable “Free Mode” in LDS
Support my work
For non-Prusa parts and filaments, check out 3DJake (International, UK, Germany, France).
I'll get a small cut of any order you fulfil using these links (at no additional cost for you 😉).
If you want to support my work directly, you can buy me a coffee.
If you want to order a Prusa printer and earn some Prusameters (I will also get some), you can use my referral code "@Whity" at checkout or click one of the following links
(the code only works for the first order of each printer model):
| CORE One | CORE One Kit | MK4 | MK4 Kit | MINI+ | MINI+ Kit | XL | SL1S | SL1S+CW1S |
Also check out my other models.