1 / 2
Nest Doorbell (Wired, 2nd Gen) Extended 45 Degree Mount — zdjęcie 1
1 / 2

Nest Doorbell (Wired, 2nd Gen) Extended 45 Degree Mount

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Extended 45 degree mount for the wired Nest Doorbell

Ocena
0 / 5
Polubienia
5
Pobrania
43
Wydruki
0
Wyświetlenia
214
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Share Alike

I needed to have a 45 degree mount for the doorbell, and my old doorbell was installed in a nook in the door, so the Wasserstein mount wouldn't fit.

I created a mount that has an additional 3cm extension before rotating 45 degrees.

Also, since I realize that most people probably don't need a full 3cm extension, I've included a 1.5cm version of the model. I never printed the 1.5cm version, so I don't know if the doorbell interface from the 3cm version would be compatible, best to print both the 1.5 models if you're going to go that route.

Tagi