Desiccant Spool Tumbler with Hydrometer insert
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Same Tumbler but with inner cylinder offset to allow an incredibly satisfying snap in of a circular hydrometer.
- Ocena
- 5 / 5
- Polubienia
- 17
- Pobrania
- 80
- Wydruki
- 2
- Wyświetlenia
- 646
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I liked and printed other models like: https://www.printables.com/model/106687-silica-gel-desiccant-containers
But they don't fit my filament spools. So I spliced the lid from Michal's model into this one from chuyskywalker.
I printed these with PETG filament. Each takes about 5hrs to print.
I understand offsetting the inside of the cylinder recess for hydrometer results in need for supports, however, with proper settings the supports come out easily and the inside is hidden by the hydrometer.
Settings to use for print:
use same settings as in https://www.printables.com/model/436044-desiccant-spool-tumbler
Settings to use for supports:
Style: organic
Top contact Z distance: 0.3mm (just type it in, this one is important, 0.2 is not enough)
Pattern Spacing: 1.1m
XY separation: 100%