1 / 9

Mastermind Board Game n=5

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Informacje o modelu

Źródło: Printables
Kategoria: Board Games
Licencja: Creative Commons — Public Domain

Szczegóły Wydruki i komentarze Remiksy Kolekcje

For an FDM printer, and this was prototyped in standard PLA.

The printer I used to prototype this was a Bambu P1S with the following settings (if you also have this printer then there is a 3MF already attached for the board/drawers and also the pins separately):

For the board, drawers and concealer:

Layer height: 0.16mm

Initial layer height: 0.2mm

Infill: 15% Grid

Wall loops: 2

Supports: yes (I just used standard grid style ones)

For the playing pins:

Same as above, but I used tree supports as I found they came off easier.

For the scoring pins:

Same as above, but no supports needed