Mastermind Board Game n=5
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
My take on the classic mastermind board game, but with n=5. I have added space for some small 5mm x 2mm round magnets t
- Rating
- 5 / 5
- Likes
- 25
- Downloads
- 104
- Makes
- 1
- Views
- 554
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Board Games
- License
- Creative Commons — Public Domain
For an FDM printer, and this was prototyped in standard PLA.
The printer I used to prototype this was a Bambu P1S with the following settings (if you also have this printer then there is a 3MF already attached for the board/drawers and also the pins separately):
For the board, drawers and concealer:
Layer height: 0.16mm
Initial layer height: 0.2mm
Infill: 15% Grid
Wall loops: 2
Supports: yes (I just used standard grid style ones)
For the playing pins:
Same as above, but I used tree supports as I found they came off easier.
For the scoring pins:
Same as above, but no supports needed