1 / 3
Skadis – Bosch professional 12V battery holder (T-nuts system)
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Bosch professional 12V battery holder for IKEA Skadis, designed for the T-Nuts system.
- Ocena
- 4,875 / 5
- Polubienia
- 55
- Pobrania
- 289
- Wydruki
- 9
- Wyświetlenia
- 1442
- Oceny
- 8
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (1)Wydruki i komentarze (Wydruki: 9) (Komentarze: 9)Remiksy (1)Kolekcje (111)Powiązane
A Bosch Professional 12V battery holder for the IKEA Skadis board, designed to be used with the T-nuts system. Remixed from this model.
–
It requires:
- Two M2.5 T-nuts (grab it here)
- Two M2.5×16mm screws
The model has a front 5mm hole for a screwdriver / allen key access.
I printed mine with PETG, in the orientation showed in the pictures.
.2mm layer height, 3 perimeters, 15% infill.