Wand with dragon head on the tip and dragon scale handle
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Wand with dragon head on the tip and dragon scale handle
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 24
- Wydruki
- 0
- Wyświetlenia
- 183
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Costume Accessories
- Licencja
- Creative Commons — Attribution — NoDerivatives
Prop wand with a dragon head at the tip and dragon scales. Awesome for wizard and witch Halloween costumes or cosplay. Supports can cause some issues because they can weld to the wand and pulling them off leads to some rougher areas. You can decrease supports but unsupported areas may droop while printing. For this reason I don't recommend printing upside down because the dragon head can have rough areas and ruin the look somewhat. I also recommend sanding a little if there are rough areas to improve feel and look. Increase infill to help with the hollowness of the wand.