Liczymy pasujące modele…
Purely mechanically controlled filament winder for Bambu Lab P1, X1, X1C or X1CC 3D Printer. Printed on Bambu Lab X1 CC. Watch the videos first at the bottom, at the end of the description. If there is news about the model, you will find…
Taking inspiration from my original fidget toggle switch , I designed a print-in-place version that uses about 8 grams of filament and takes about 20 minutes to print on my X1C. This model is experimental (it's definitely still a…
The Deep Calls... 🐙 A tentacle rises from the depths to safeguard your Playstation 5 controller. Functional, eerie, and impossible to ignore. Tentacles not your thing? How bout dem bones
This little gizmo holds a miniature pushbutton switch (see photos) and has magnets on the bottom to enable it to be held firmly on steel/iron metal surfaces. The pushbutton switch used is designed to be panel mounted in a 1/4" (7mm) hole.…
Upgrade your garage wall button with this mechanical switch conversion. Instead of a cheap plastic doorbell-style button, this uses standard Cherry MX-compatible switches to trigger your garage door opener. Mechanism : This is a wired…
Overview A compact desktop housing for the common 16 mm, M12x1 thread momentary push button (the red-cap style). The base snaps on without screws, a hidden magnet holds it to steel surfaces, and the cable enters at an upward angle to keep…
This is a compact custom filament sensor version of the legendary Sherpa Mini that includes several improvements. Please read the differences section compared to the original Sherpa Mini. This version uses nylon screws and nylon nuts at…
Smoothed and fancied remix of this light switch lock. https://www.thingiverse.com/thing:243827 Sorry about the bad quality of my own print, I'm still calibrating it in a new environment. Lay flat and use tree support for the best results…
A great Wall Art of Halloween's witches. Do not forget to upload your makes, thanks ! Inspired by a sticker
This is a witch decoration that I made for my wife to use around the house this Halloween. It is designed to mount on a wooden skewer and stick in a plant pot, or vase. I added a couple of different length stems that can also be printed,…
I wanted to light up my HomeCube with a white LED strip and turn it on and off using a small power switch from the outside of the HomeCube enclosure. Therefore, I modified the original base foot corner so that my switch fits perfectly…
The model has not been tested and may need further adjustments for the face plate.
Compatible with enclosure as it acts as both camera holder and panel holder. To mount it, I used an M5X20 screw with an attached nut to make it like an M5X18.
Another version of Servo Mount for Lego Train Switch. The others simple do not suit me well. All parts are printable, you will only need SG90 9g micro servo with a small screw (usually part of servo) and sure, the original lego switch…
The mounting brackets have 5mm holes for screws. The tenda switch has the following dimensions: - Width: 101 mm - Length: 100 mm - Height: 26,5 mm Happy printing and mounting :)
Print with Supports. I used SunLu PETG 0.28 layer height 0.6 mm nozzle 90% extrusion factor (Klipper) getting the supports off the bottom was a bit difficult. I found lightly prying at all the edges makes the internal support come off in…
Arcade For Switch Mk1 and Oled With Buttons Board /!\ The plate 4 is for the non Oled version /!\ Print on place , 15% infill , no supports required. Add with Board Buttons Please clean your Bed thoroughly and check that it fits properly.…
Amiga 500 Trapdoor 2 switch for 1Mo chip Ram. Mini Interrupteur à Bascule: https://www.amazon.fr/dp/B0BTM3WQXN?ref=ppx_yo2ov_dt_b_fed_asin_title&th=1 M3 Vis:…
UK Holder for IKEA STYRBAR. Model adapts the original to cover UK light switches completely. Uses existing hardware. Still gives access to light switch if needed. Printed with supports on Creality K1 Creality Hyper PLA white 0.16 layer…
I brought Mobapad joycon which do not include the adapter with it. So I create my own that not too wide when assembly with the Mobapad. Along the designing process I found that the dimension of sliding rail is different than original one…
A mount for the cartographer probe on the switchwire/enderwire. It's a remix of the x carriage and the belt grippers to provide clearance for the probe and wires. Mount requires two more heatset inserts into the bottom of the carriage and…
After removing the original cover, the contacts on the switch are open at 230 V. If you lift the printer at the bottom, you can easily touch them. This is prevented by the cover. M3 hammer nuts for 20x20 profiles and M3x10 screws are also…
Junction box with space for a Dayton reversable drum switch on top. 2 holes in the box for standard ¾" knockout wire clamps. Cover holes are clearance/tap size for #8 machine screws. switch mounting holes are for #10 countersunk screws.
Works with Bambu Lab X1, X1C, and P1P printers. The Bambu Dual USB with Switches is for the Bambu Lab 3D printer. It utilizes the 24v provided by the Bambu Bus Cable to power the two USB Ports. It uses 4-pin Molex cable connectors to…
Orient with the arrow toward the built plate and use tree supports 3/28/26 Added .Step File
You can choose if you want cold air for maximum cooling performance while printing your sub 60 second benchy or if you want it a little more cozy for filaments that don't like it too cold. reduces noise levels significantly, doesn't…
A stand that holds 15 Nintendo Switch games that can be easily seen so you can pick the game you want to play. Let me know if you'd like to see something similar, but holding a different number of games.
Another Christmas, another game for the Kid :) So I got a request to design a simple storage for 4 card games that could be easily used on the go. The holder uses friction to keep the games in place and the same concept is used to keep…
A miniature Nintendo Switch for your dollhouse, figurines or just for fun. Prints well with PLA at 0.1 layer height. For a nice finish iron the top layers. It works very well on the middle part, with the controllers it can smear a bit…
Should fit right in the bottom of a Kailh choc v1 switch. Reduces the travel distance and makes the switch bottom out sooner. I recommend experimenting a bit with the height and see what works for you. I've found that anything above 0.6mm…
V1.0 I may need to update this model. But you are welcome to try it out yourself. Most likely, it would just need a slight scale adjustment. V1.1 Added taller slots for cables. V1.2 Moved switch slot 3mm
Falcon2 Pro Collection This is a holder for a 5V 5mW laser crosshair pointer for the Creality 22w/40w/60w laser module used to line up material on the bed for cutting accurately and set back far enough so as to not collide with the front…
I made a switchplate for toby chuis amazing numpad design. helps with the positioning and alignment of cherry-like switches. https://github.com/tobychui/4xMacropad/tree/main/4x5Macro-Numpad It fits the screw holes of his numpad case, you…
I got tired of plugging and unplugging the y-axis if I wanted to use the rotary table of my Elegoo Phecda, so I designed a switch. Besides the filament, I used the following items: Aviation plugs:…
It uses a standard key switch and allows space for wires to exit. I connected it to my computer for a DIY On/Off Switch
I was having issues with the provided latch on the "Nintendo Switch Joy-Con Wheel Pro" model being too stiff in both PLA and PETG. The model did not allow remixing, so I recreated the latch model and included the following features:…
Organize your game collection in style! These practical and stylish game holders are designed to keep your PS3, PS4, PS5, and Switch games neatly organized and within reach. Features: Space-saving design: Maximize storage space and…
A 19" 1U rack mount for the DGS-108 switch from DLink. Both parts are screwed together with a screw and nut. I used M3 bolt and nut. Glue is not needed. It is best printed in PETG or a more stable material, as suggested by the original. I…
I printed it from PETG, 0.16 layer height, 3 perimeters, concentric infill. The tall column (the spring post) needs time to cool between layers, so, to achieve optimal results, consider printing 2 or more pieces simultaneously. Print…
The holder uses friction to keep the games in place and the same concept is used to keep the holder inside the cover. I have fine tuned the models for my printer tolerances, but it might require some XY Size Compensation in the slicer for…
I double-sided taped it to the top panel and used the wire organizer to run USB cord. Mount Uses one M3x30mm bolt with M3 Nut
works with a complaint mechanism where your supposed to cut apart a beer can and glue it with some wires to each of the contacts
Attaches a phone or switch to the Pro controller. Requires a rubber band and 1/4-20x1.5 inch screw with nut (or M6 x40 would fit). If you don't have the hardware you can download models from McMaster-Carr. Extend piece snaps onto main…
I used the Voron V0.2 Master Assembly Fusion 360 model and added a 22.15mm hole to the rear skirt so that I could add a switch for my LEDs.
This is a front panel for a simple Intellijel-style 1U switched multiple for eurorack synthesizers. As it is relatively small, even basic PLA should be strong enough for this print. 10 HP
Nintendo Switch video game storage for 12 boxes and 6 cards.
Overview Easily replace or upgrade your old or broken light switch covers with these precise, 3D-printable wall plates , designed to fit standard electrical boxes. This collection includes single, double, and triple gang configurations…
The Nintendo Switch Hub neatly organizes your Switch with a controller charging dock and accessories in a tiny footprint. The hub is designed to fit the PowerA Joy-Con-Charging-Dock from Nintendo and the original Switch Charging dock with…
I created this 3D printed part to fix an issue with the Cosori Pro 2, where the basket wasn’t triggering the safety switch to turn the unit on. I just made the part a little longer so it puts more pressure on the switch, and now it works…
This is a stand for a Nintendo Switch that attaches to the sides where the controllers normally attach. The stand sits high enough so that a right angle USBC cable can be connected to the bottom for charging. The right side also has…
You need a switch but don't have any at hand. Make your custom on/off switch if you have nickel-strips at hand. This model is parametric can be adjusted to your needs. There are basic variables in the spreadsheet for the most important…
Designed a Magsafe dock adapter for dbrand's project killswitch! It is designed to fit the Spigen Magsafe adapter, but the generic ones work just as well. Get the other side of the mount part (UMM_Lock_V4.STL) at…
Replace your tiny lamp knob with this easy to turn paddle one! There are 2 models. One is threaded and the other is self tapping. The lampshade should be printed using PETG unless you are using a low power/heat LED bulb.
Multiboard mount for Nintendo Switch Dock. It is held onto the Multiboard via 2 Multipoints found here . I recommend using the big thread multipoint for maximum strength but any of them should work. Just slide your dock into the mount…
Update for v2 is less complicated and stronger as copping like for like didn't hold up to small weak points this part is to replace the original one as over time it let the clutch fly up. this part gets rid of the play and helps keep the…
For Alien3d subscribers, full details here: https://www.alien3d.us/march-2025/ You shouldn't need supports on any part of this. I printed it all completely without supports for what is shown in the video. The "post" is probably the…
With the arrival of the Core One I had some difficulty reaching the power switch in the back of either the XL or Core One. I made this box to house two remote switches I bought from Amazon (link below). It uses 4 M4 nuts & bolts to secure…
While making the Moon rocket I wanted to have a box containing the Shelly RGBW2, its cables and the momentary switch.
Needed a way to mount the 60mm electronics cooling fan on the switchwire or add a second one Middle skirt modeled to eliminate mounting points for the Mini12864 Bodies on holes can be used to add infill pattern or multicolor to the skirts…
Fun “clickable” detonator. I designed this for my dad who wanted something similar to a pen click, but bigger. Could be a great prop for cosplaying! I printed it on low settings using my ender 3, and it still came out awesome.
This rubber pad is a replacement part for various Simson and MZ models. It is mounted below the light switches on the right and left sides. It must be printed from TPU. A Shore hardness of 95A works, but I recommend using slightly softer…
Print Settings: Layer Height: 0.24mm Infill: 10%-15% Infill Type: Grid Filament: PLA Supports: Optional Brim: No
Find your lightswitch more easily in the dark with this glow in the dark frame, specially made for Niko HWD switches. I mounted the frame with double sided adhesive tape. Outside dimensions are 72x72x2mm.
Arduino code: https://github.com/AndunHH/spacemouse !!!buttons must be manually activated and set!!!
The lever for the pull switch in our Winterwarm bathroom heater broke. I designed a similar piece ("WinterWarmSwitchLever"), printed in ABS and fitted - it seems to work for now, but given the original failed I made a quick “robust”…
This is a 3D printable angled holder for Nintendo Switch 2's Joy-Con 2 controllers. Designed to hold your controllers at an ergonomic angle to enhance comfort during long gaming sessions. Magnets Required: This holder uses 20x10x5mm…
I promised to cad this up ages ago and as soon as I actually started rebuilding my enderwire I actually did it. Inspired by RockAndRoll for the 2.4, you can tip an open or enclosed Enderwire on its side and and it will be stable. Yes my…
I was inspired by this deisgn https://www.thingiverse.com/thing:6100697 thing is, i don't like the fact that i need to print it with support, so i made my own i also chose to use 6x2mm magnet, which are also used in the gridfinity project…
This is a mod to attach a DIY detachable remote pressure switch to the C8 flashlight. The printed parts replace part of the stock rear switch assembly. You are also going to need XT30 connectors, and some metal strips (like those they use…
couldn't get tinkerman's mount to do what i needed without drastic modification, but was inspired
JetKVM 1U Rackmount Remix for 10" Racks – Built for EZCOO KVM Integration Meet the JetKVM-KVM — a clean, compact solution for managing up to four systems with a single JetKVM and a KVM switch. Designed to fit 10" racks, this custom 1U…
It features a display port for one 126x64 OLED display (ssd1306). Additionally up to four toggle switches can be mounted. You are going to find all .step files for download too, for you to modify Printing: Print all parts in the…
This stackable Gridfinity bin can store a keyswitch tester set such as the Gateron Keyswitch Tester (35pcs). This bin store 36 keyswitches in total. Settings Tested with the following: Original Prusa MK4S 0.4 mm Nozzle 0.2 mm height…
This is a custom-designed adapter that allows you to mount an IKEA SOMRIG or RODRET remote control neatly over a standard UK light switch. It clips securely in place using small, strategically placed clips—no embedded magnets, adhesives,…
Cover for power button or any modified key, i add switch to replace the power button on my m-atx with soldered pin switch connected to 2 pin power switch in motherboard socker.
This is a simple wall mount for the XikeStor SKS3200-8E1X-P ethernet switch. This 9-port multi-gigabit switch with POE+ has three M3 tapped holes on either side that are designed to be used with the included rack mount brackets. I've…
/!\/!\/!\ Warning, it use 230V, sou can die if you don't know what you do. I can't be responsible if you do this mod wihtout knowing what you are doing/!\/!\/!\ You must check with your insurance if you won't have problems in case of…
Lego Monorail Motor with the direction selector switch that was included in the original motor This uses a “MS-23C01” sliding switch on a custom designed pcb, that also allows you to power the motor from a small lipo battery inside the…
A silly cover for a UK Lightswitch that allows you to fit an 88mm dog training type speaker button (like these https://amzn.to/44nmemS ) instead of a switch. Perfect for use with hue/smart bulbs as the button can be removed for access to…
This is a simple, support-free bracket for mounting a network switch in a mini rack. Easy to 3D print at 0.2 mm layer height, it fits most standard printers and keeps your setup neat and secure. Switch dimensions are 160x35mm. Model…
This is my version of LilyGo T-Embed Back Shell with power switch. I scraped the switch from some child toy, it looks like SS12D00. The shell uses screws and does not have mounts for magnets. Update 18.02.2026. Added version with 2 holes…
Remix of RoJoTrDi's version . Changed the general design a bit and added mirrored version and added rotated version to work for a sideways dock. There a different versions for the original Switch and Switch 2. Switch front and mirrored:…
Allows you to easily switch guards with one hand, when your other hand is not free. Designed for Philips Multigroom guards. There's a slight learning curve, but it's easy after you do it a couple times. To detach a guard, slide it down…
shabbat switch cover כיסוי מתגים לשבת cylinder type fit Israel default electrical switches.
This may only fit depending on where you want to put it, but you hang the tiny part and then use string to hang it.
Do you have a TV set close by your 3D printer like I have? If so, you most likely wanted to have a good way to store your TV control and your Switch2Pro controller close to the printer? Well - if you happen to have either… a Samsung TV…
Merged Sherpa Micro - ECAS + Switch, with Sherpa Micro R2RC2 housing_core_x1_rev8.stl which accepts the RIDGA v2 gear. Prints flat on buildplate without supports.
Early prototype v.0.8. :) Note: I've only printed this as a draft, using PETG, with support everywhere, 0.28mm layer height, DRAFT mode (Core One). The result is a bit rough, 4 hours print. Next move: Try to make more of a “yoke”-version…
Trials Leonelli style magnetic kill switch lanyard. I printed the top down but it could be bottom down with supports if you wanted to add text to the top. It needs 2x 10mm x 2mm magnets and paracord.
![TT SpaceMouse V2 - mounting for 4/8 MX Switch adapter [45 degree angle]](https://media.printables.com/media/prints/c17b23dc-4d91-42ab-b530-3f59bf4e5afd/images/9338696_b5b10274-5e00-4788-a390-84c0ce7ae1fc_02b600ec-7495-4f4e-bac0-cebd85aa2af0/render-test.png)
![Nintendo Switch 2 Joy-Con 2 Ergonomic Grip [v1.3c March 05 Update]](https://media.printables.com/media/prints/4b7b552d-4c32-42a9-a2fc-27f7983368f5/images/10801860_1b8c1673-aade-4e65-8542-53cdf24acab9_2e3fcda5-3eaa-40b1-b4e4-d4319db0bad5/img_1898.jpg)
