1 / 2
Low profile/friction filament spool holder for wall
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A smooth rolling, low profile spool holder to be wall mounted.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 35
- Wydruki
- 0
- Wyświetlenia
- 170
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Share Alike
I couldn't find a simple, wall mounted filament spool holder to fit my needs, as most of the ones I tried were either too big, or hard to mount, or due to the print lines they caused a lot of dust with cardboard spools.
So, I modeled this one to use a piece of standard PVC pipe rolling on the printed part, for super smooth operation.
Features
- Low profile to fit the common 1 Kg spool size
- Wall mounted with 2 screws to ensure horizontal alignment
- Smooth rolling thanks to the PVC pipe (reduces dust from cardboard spools)
- Easy to print, maintain and install
Assembly
- Print the two parts in the default orientation
- Cut a piece of 20mm inner diameter PVC pipe
- Slide the PVC pipe onto the support and use an appropriate sized screw to install the cap (the screw has to thread into the support)