1 / 2
Low profile/friction filament spool holder for wall
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A smooth rolling, low profile spool holder to be wall mounted.
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 35
- Makes
- 0
- Views
- 170
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Share Alike
I couldn't find a simple, wall mounted filament spool holder to fit my needs, as most of the ones I tried were either too big, or hard to mount, or due to the print lines they caused a lot of dust with cardboard spools.
So, I modeled this one to use a piece of standard PVC pipe rolling on the printed part, for super smooth operation.
Features
- Low profile to fit the common 1 Kg spool size
- Wall mounted with 2 screws to ensure horizontal alignment
- Smooth rolling thanks to the PVC pipe (reduces dust from cardboard spools)
- Easy to print, maintain and install
Assembly
- Print the two parts in the default orientation
- Cut a piece of 20mm inner diameter PVC pipe
- Slide the PVC pipe onto the support and use an appropriate sized screw to install the cap (the screw has to thread into the support)