2.8-12mm CS mount lens sleeve
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A sleeve to cover the 2.8-12mm CS mount lens to allow for easier grip & control
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 30
- Wydruki
- 0
- Wyświetlenia
- 491
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
A sleeve designed to cover the 2.8-12mm CS mount lens. Designed to not only allow for easier grip and control, it also gives a more professional look for this lens.
Designed for this lens: https://www.amazon.com/Fielect-Manual-Security-Without-2-8-12mm/dp/B081YGM8JM/
The middle “iris” section is tension-fit however, I found it best to use some small strips of double-sided tape to keep from slipping.
The “zoom” and “focus” sections are fasted via x2 M2 5mm screws.
The sleeve overall diameter is 40mm, originally designed for the Game Boy Camera 2bittoy camera+ shell: https://2bittoy.carrd.co/
My 5-50mm CS mount lens sleeve can be found HERE.
If you like my work, consider sending me some support! https://ko-fi.com/gameboycamera