1 / 10
Team Associated Pro4 SC10 Shorty LiPo Battery Holder — zdjęcie 1
1 / 10

Team Associated Pro4 SC10 Shorty LiPo Battery Holder

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

These adapters allow a 2S shorty LiPo battery to be securely held in the Team Associated Pro4 SC10 short course truck.

Ocena
0 / 5
Polubienia
3
Pobrania
26
Wydruki
0
Wyświetlenia
309
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
RC & Robotics
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

A stock Team Associated Pro4 SC10 does not have a good way to secure ‘shorty’ 2S LiPo batteries, which are popular for racing and come in much higher C ratings than the standard basher style batteries. So I designed these adapters to use the same 20mm X 250mm battery straps I also use for my standard 3s LiPo batteries (and adapted 2s batteries), but allow clearance for the bullet connectors and also ‘grab’ the battery to keep it firmly in place.

The adapters have loops that let them stay with the battery straps for convenience, so it doesn't slow down taking batteries in and out between races, for example:

I used black Hatchbox PETG and printed them on the side to minimize the amount of supports as shown below:

The adapters fit perfectly in the chassis such that the battery does not budge/slide at all once the straps are cinched down. Enjoy!

Tagi