Yeti tumbler handle/ 10 OZ
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I made this for my nephew's birthday. It fits a little snugly, so I'd size it up about 1%-0.5% It takes long to print.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 24
- Wydruki
- 0
- Wyświetlenia
- 200
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
https://nd3dprint.etsy.com
This model is for the 10 OZ Yeti rambler cup/tumblers.
It fits a little snugly without adjusting anything but if you want, I'd suggest sizing it up by 1%-0.5%.
It takes a while to print but it's worth it.
I printed it at
Nozzle temp: 220
bed temp: 50
Layer height: 0.12mm
Wall/shells: 4
Retraction speed:40mm
Retraction length:0.8mm
Infill: 25%
Infill type: gyroid
Bottom layers: 6
Top layers: 6
supports: organic
I found that if you have problems with the layers skipping/shifting print it in the orientation shown.
Do the bigger face of the handle facing down.