Yeti tumbler handle/ 10 OZ
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I made this for my nephew's birthday. It fits a little snugly, so I'd size it up about 1%-0.5% It takes long to print.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 25
- Makes
- 0
- Views
- 202
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Gadgets
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
https://nd3dprint.etsy.com
This model is for the 10 OZ Yeti rambler cup/tumblers.
It fits a little snugly without adjusting anything but if you want, I'd suggest sizing it up by 1%-0.5%.
It takes a while to print but it's worth it.
I printed it at
Nozzle temp: 220
bed temp: 50
Layer height: 0.12mm
Wall/shells: 4
Retraction speed:40mm
Retraction length:0.8mm
Infill: 25%
Infill type: gyroid
Bottom layers: 6
Top layers: 6
supports: organic
I found that if you have problems with the layers skipping/shifting print it in the orientation shown.
Do the bigger face of the handle facing down.