359 models
Have a cup, need a handle? Print instructions Inspired by jasonalday designs https://www.thingiverse.com/thing:2668183 Needed a handle that attached at the bottom to not obscure the grinch face on my mug. No glue or adhesive needed, the…
Print approx. €2.87–€3.51 excl. taxPreliminary estimate for PETGSource material: PET
This vault uses 100% printed parts and adhesive/glue - no bearings or metal dowels. It can be printed on Prusa Mini (and larger printers) and the entire box prints without support - the only exception is the key but it prints well with…
Bill of Parts : Required Parts: Metal Dowels - https://www.amazon.com/dp/B07F3T5FKL?ref=ppx_yo2ov_dt_b_fed_asin_title (6) 20mm x 5mm - Door Frame (6) 40mm x 5mm - Door Frame (2) 30mm x 5mm - Hinges (6) 12mm x 5mm - Handle/Center Gear -…
I was looking for a keychain that looked like the starbucks tumbler. I found one that looked ok, but the through hole for mounting to a keychain was just all wrong. So I created this model from scratch in Blender. Its a cylinder that is…
This model has become very popular on TikTok, and I've received numerous requests to make the files available for print. So here you go! This is a Stanley tumbler shaped lip balm holder which prints in 4 pieces (must be assembled). The…
A remix/remodel desiccant holder. My original model isn't ideal because when you swap it, you risk spilling the desiccant. Humebean's model is far more ideal because it has an inner lid, but I wanted to make a few tweaks. Uses 3d printer…
This is a direct replacement lid for 40oz Stanley The Quencher Tumbler. My wife's tumbler was knocked off the bleachers at a baseball game the other day breaking the lid. Instead of buying the $10 replacement, she ask if I could give it a…
This design uses a mix of 3D printed parts, various lengths of 5mm dowels and a few springs. Everything can be printed without support material (in PETG and PLA, at least) but brims may be required for some parts. Below is a list of all…
A simple snack tray that fits over the top of a Stanley Tumbler (40oz). Divided into four sections with a “bridge” to sit above the tumbler's handle. Use at your own risk; special consideration should be given to food safety. Printing…
I made a cup holder for the larger style tumblers that clamps on the edge of a desk. I have seen other cup holders for these larger mugs but, they are permanently attached to the desk via screws. That is not an option for when I am at…
Replacement cap for Stanley Insulated Tumbler. Printed upright Kingroon KP3 printer IIIdmax pla+ “Space Grey” Normal supports, everywhere .16mm layer height .04mm nozzle
A simple snack tray that fits over the top of a Stanley Quencher Tumbler (30oz).
Описание модели: 3D-модель стилизованной подставки-неваляшки для умной колонки Дизайн вдохновлен классической игрушкой-н
Copycat of HORL sharpening system, easy to print, no supports. Printed in PLA, infill at your choice, in my case all has 15% gyroid, 3 perimeters. Orings best in TPU hardness 95A, really good fit and no mess to install. Parts are oriented…
A tumbler machine to smoothen 3D prints. Works best with prints which are coated with filler or are printed with metal filament (Color Fabb copperFill). As abrasive medium brass bolts are used. M5 bolts and nuts secure housing and…
This is a mini tumbler, measuring 80 mm high. Perfect for keychain decoration. It can be opened, and small stuff can be stored inside. This tumbler can be a graet gift for friends! You can set filament change 2,6 mm from the top if you…
This is an alignment clamp for attaching sublimation paper/stencils to 20oz sublimation tumbler blanks. To put the two clamp pieces together you need a single metric M5x10mm bolt and nut. The clamp has spaces for attaching rubber grips. I…
This is a practical example on how simple tumbler locks work. Components There are 3 different variations of the inner plug. plugA: This plug features a wide window to make the pins easy to see, however because the pins would fall into…
The model is straightforward; print the handle upside-down, and the insert on its side. Use cyanoacrylate glue for the insert. This was originally designed by jasonalday on Thingi, and the insert design remixed by DanBuro on the same…
Update 15/09/2023 “Spool Lock Extended 16mm” added - for wide spools. Regular size spool locking part is NOT re-uploaded here as I did not make any changes to it, get this part from here:…
5% infill Lids are loose fitting to make it easier to use. March 12 2025: Added holder that had both size lids
I made this cap to cover the straw to keep dust and particles out of my tumbler. It prints easily as oriented in the STL without supports.
Add a touch of personal style to your drink with this cute dog paw straw topper. Straw hole - 9mm SUGGESTED PRINTER SETTINGS: - Layer Height: 0.2mm - Top/Bottom Layers: 4 - Perimeters: 3 or 4 - Seam: Nearest - Infill: 15%-20% Gyroid or…
One of the biggest headaches in laser engraving tumblers using a chuck rotary is getting the cup on the chuck precisely lined up. “Frustrating” is just the beginning. Expensive if you mess up either by being off center or you clamp too…
I printed in PLA with 100% infill so I can tighten the chuck really well.
This is entirely chuyskywalker 's work, I'm just sharing an optimized 3MF built in Bambu Studio 1.7.3.50. I love these containers and periodically use them to test new filaments on so wanted to share my optimizations. There are three…
Designed in Onshape, model available here: https://cad.onshape.com/documents/8a46735937a058ceb06fb0f2/w/c96c660f03c11aaf12179a62/e/501e3072f520c0d65a561e53
Edit: Turns out these work great as bottle holders for the fridge. Who knew? Simple model that can accomodate a wide range of tumbler sizes. Tested by my partner, who advises the friction is just right for applying wraps and waterslides…
Great for polishing 3d print with brass/copper/bronze and other metal-filled filaments (and rocks of course !) Remix from : https://www.thingiverse.com/thing:2744886 Almost fully redraw with the aim to make the structure with a CNC router…
2 sizes of ball mill canisters for DIY ball mill. Works way better than mason jar. For better sealing of the lid use 2 component silicone or other sealing compound to form a gasket (fill the bottom of the lid with thin layer of the…
This is a simple wrench I have created to assist in opening and closing the Frankford Arsenal Tumbler. It utilizes 2x m5x50mm bolts to fasten the handle to the wrench. There are two different handles for your choosing: Slim Handle - if…
Like a punching bag that dispenses food… for cats About 1.5 months ago I got fed up with that fact that any cat toy with a feather had a lifespan of days to week in my household and so I designed a toy with a replaceable feather-thingy .…
The main body of https://www.printables.com/model/436044-desiccant-spool-tumbler has a horizontal plane which isn't very stable if printed with zero top layers. I've converted this to a cone so it isn't considered as a top layer anymore.…
RTIC went and re-designed their 30oz tumbler, and the old handles don't fit on the new mugs. My guess is they did it to make people buy new accessories. Maybe YETI did it first and they followed suit. I don't know if this will fit YETI…
Adding a cone like this to the center increases vortex action and cleaning efficiency. Similar concept to the commonly used funnel mod. Printed in PETG with 3 perimeters for strength, though printing in TPU would make for better…
This is for 1.05 in outer diameter pvc pipes Print Settings Printer Brand: Creality Printer: CR10S PRO Rafts: No Supports: No Resolution: .20 Infill: 15 Filament: Any PLA Any Category: DIY
Mount the Tumbler (LEGO 76240) to the wall. I have also added with or without a Batman logo. You choose! Print at 50% infill as this fellow is heavy. This is months of work - scrapped and redone in a weekend! The original one had…
The spacer aligns itself through 2 10x3mm magnets like the original dosing cup. The height with spacer is the same as the original. Magnets are held in by glue. .sted File is included
A simple and easy-to-assemble tumbler for polishing 3d printed parts or stones this design features a bldc motor with power draw of only 2.5w when running. Material requirements: 1pc metal can with the dimensions of 100x150mm, but others…
This is a holder for Tumbler lids, too many of these have accrued over the years and I needed a good way to stack them without them falling over. It can hold lids as wide as 80-110mm. I made 3 sizes to fit different printers/requirements…
simple jig for any cylindric object including : tumbler, bottles , cups and more Fits to Xtool F1 screws. print 2 of these
If you print with bronze, copper, aluminium or steel filament, this can help you with the finish afterwards. Print all parts once Print container-cap.stl one extra time (so you have a cap at both ends) Print locking-plug.stl three extra…
a Stanley tumbler for your dolls in case they want to sty hydrated in style
Easy to make tumbler / polish machine. I looked at several designs and combined the best things into this design. e.g. easy to make with small amount of (printed) parts and adjustable for different sizes of barrels, pots, cans etc. Added…
A total of 21 dowels with different lengths are required for the assembly of Rocco's vault . Quite expensive if you use metal dowels. Therefore, I have designed all the dowels exactly according to the given measurements. In my opinion,…
We got a 14oz Stanley tumbler for my daughter for Christmas (so she could be like her big sister) but knowing how clumsy all 5 year olds are we decided it needed a handle. We didn't want to pay the $15 for the only version we found on…
Stanley Tumbler nameplate with cancer awareness ribbon. Print in any color for different causes example shown for breast cancer awareness in pink. Print face down for both parts, split the 3mf and rotate the ribbon and plate for…
UPDATE: I rounded the edges so they are more comfortable to use. I have provided the original thick version and two slim versions. You can scale the model however you like to fit your needs. Please give me more feedback you you experience…
20oz Milwaukee tumbler handle
I created this to carry my 30 oz Yeti tumbler mug. It's a generic handle that will fit a medium or large hand. Recommend printing upside down (native orientation in the file). Recommend PLA and 20% infill. Use a small amount of supports…
This amounts to nothing more than saw it being reviewed and said that's a great idea and I can make it. So I've included two versions of it with and without a top cap so you can choose which one you want. Print Settings Printer Brand:…
A friend of mine makes these epoxy cups and asked if I could build a turning station. She ordered the motors from amazon (just search for cup turner motors). After watching some videos, I didn't like the way everyone was attaching the…
The files provided are to replace all the plastic tumbler parts for a Hornady Case Tumber. The STEP files are included so you can modify it if you would like. This design may work for RCBS tumblers as well. Print with ABS+, PETG, or even…
Original design. I've seen other similar models but I either don't like the handle or the random design on it.
This is a working Stanley Tumbler. If you intend to actually use this you will need a minimum of 4 walls, print in PETG, and spray it with a protective coating to make it food safe. you will need to glue the top and top screw piece…
Blog post: https://appsolute.hu/2022/02/sajat-fejlesztes-koptato-kevero-polirozogepet-gyartunk/ This 3D printable Rock Tumbler can be built and customized to fit your motor and your controller. You can also print your timing belt for it…
Needed something to hold powder coated tumblers in place while etching them on my co2 laser. I do not have a rotary attachment, so i can only etch a single “face” of round things. Designed this quickly based off some basic measurements of…
Mounts directly to a 120mm fan with standard sizes and M4 (DIN912) screws. You can use 2 adapters to create an inline fan and you can combine it with my filter cage. It is a tight fit (outer diameter is 101mm) and the bulge (2mm, so +4mm…
Tumbler and Ornament cradle.
This is a remix of ShaneTalksTech Clamp on Desk Cup Holder. His didn't fix my desk due to a support bar and my desktop being only 5/8 inches ~15mm thick. I deepened the the mouth of the clamp and moved thread out so it could clear the bar…
this is an inspired toy from LEGO super heroes batmobil tumbler, enlarged two and a half.
I designed this for the wecreat laser rotary attachment. It will also work with the X Tool Rotary. I did embed the coordinates the center edge of the cup should line up when selecting one hundred millimeter as the diameter in the Wecreat…
Just a simple ergonomic handle for the Yeti 26 ounce tumbler with straw. Print upside down with a brim.
I designed this adapter/holder to be used with a laser engraver and three-jaw chuck. It is meant to hold onto the internal lip of the tumbler with the chuck to allow larger tumblers to be engraved with a rotary device. I designed it…
These herringbone spur gears fit the National Geographic Professional 2 Pound Rock Tumbler Kit , which is known for being much too fast compared to other popular tumblers on the market. This gear reduction slows the speed from about 80-85…
Lost the lid from your beloved Yeti tumbler? Here's a printable replacement. The pocket is designed for a 3/8 x 1/8 magnet or a 10mm x 3mm magnet. The magnet will have to be glued in place, unless you modify the size to fit just right…
Adding a handle to the handle-less. I was envious of mom's Stanley. I wanted to make it easier to get my yeti cup which is handle-less. Fits my Yeti 30oz Ramble tumbler style mug I found the original model, but it had a “built-in support”…
It will use the M4 clip from https://www.printables.com/model/438045-traeger-pal-pal-pop-and-lock-accessories/files (P.A.L. - M4 Clip (single).stl) You just need an M4 8mm screw and 2 nuts. I used OrcaSlicer and just added one support to…
This is a remix of the "Tumbler Guide for Ortur Rotary Attachment" by jnemes. I basically just went in and added some support structure to make the parts a little more stout. The dimensions remained the same as far as attachment goes. It…
Slightly oversized large pulley wheel for National Geographic rock tumbler. Not a direct remix of the source but works very nicely with it. Stock belt tension was far too low which caused slipping and caused the tumbler to chew up the…
After building a very crude version of this tumbler to polish up some bronzefill dice I made I revisited the idea to make this more clean looking version. This requires a very small amount of materials to make and there will be a version…
A mini version of a drink tumbler. I usually scale mine down to 75%.
I created this design for a friend to organize their Yeti lids. The 2 piece design uses a sliding dovetail to connect the wall mounted baseplate to various holders. The slotted lid holders were printed on their side. The straw lid holders…
My wife does these resin tumblers/cups as a hobby. She uses the stand to spray paint the tumblers while upright and then to hold them while the resin cures. The process uses a machine that spins the tumblers, then as they spin you add…
I designed this for my DF83 grinder to hold the Webber Workshop Blind Shaker. Print without supports and has space for one imbedded magnet, No glue required. https://amzn.to/4c2ju0n 2/28/24 I re-designed the mount to use the original…
Decorative inlet for NATO 40mm threads. Untested. Should print without support, orient as pictured. General disclaimer: Use at your own risk. This and more also available fully printed and shipped: https://order.jan-asleep.com
I split the original box into three parts. This makes it look a bit fancier and requires slightly less material. However, the main reason for this measure was that I often encounter issues when printing large solid parts—they tend to…
These attachments are designed to clamp the tumblers from the inside of the mouth. This allows you unobstructed access to fully engrave/etch the entire outside of the tumbler without the jaws interfering with the laser head. There is a…
The Yeti Rambler 10oz Lowball is a great tumbler to keep hot or cold liquid, but it's completely flush circular without any handle. It is also wider than most tumblers, making it a bit hard to grip comfortably for smaller hands. I have…
Printed in 95A shore hardness TPU 0.2 layer height print slow, the wall becomes very thin at the top slides onto the tumbler easily, but takes intention to remove it
This particular STL/3mf file contains geometry to make the handle for my 20 Ozark Tumbler, which is approximate 87mm in diameter. Note that the ring is actually slightly tapered so that in matches the tapering/curvature of the actual…
This is a replacement handle for a 40oz TDE tumbler. The original handle was spot welded, and the tabs broke off with the handle when it was dropped. I realized that the tumbler is like two opposing tapered cylinders. So, I printed this…
I am trying out the Weber Blind Shaker / Tumbler (can be seen with both names), but I didn't want to sacrifice the option of using the original Niche cup with my grinder. I modeled the original cup holder and added cutouts for the Weber…
This design is licensed for personal use only. Commercial License Available To sell physical 3D prints, join Woow Pro on Patreon: https://www.patreon.com/cw/WoowConcept3D/membership ✅ 30+ popular model Welcome Pack ✅ 3+ new models every…
This is an OpenSCAD script to generate a fully functional pin tumbler lock. The only extra hardware required is some pen springs. For the lock shown here you will need 5 springs, mine were 24mm x 4.5mm in size. The script has a number of…
A Pickleball Pal for your Stanley Tumbler Straw . There are 2 sizes: Small - 40mm Medium - 60mm The cutout for the straw is 10.5mm Printed on a Bambu Lab P1S with PLA and a PETG raft for support
I been working on this lil project also - a Poorman's JOBO. Works with all the tanks I tested and or own Nikor, Patterson, Yankee, GAF. I kept this a simple as possible. I started out with and Arduino controller and a bunch of other BS I…
gear broke on the antique rock tumbler so I modelled another one. You may need to drill the center hole slightly larger for your machine Print instructions Unassociated tags: gem tumbler, rock tumbler Category: Replacement Parts Summary…
Rock Tumbler | polishing machine for a Kenwood Chef kitchen machine. you need two 608zz ball bearings Print instructions Category: Hobby Summary Rock Tumbler | polishing machine for a Kenwood Chef kitchen machine. you need two 608zz ball…
Overview This upgrade replaces the stock drive system of the low-cost China rock tumbler shown in the photos . It uses a fully printable TPU timing belt together with PLA/PETG pulleys (8.5 mm width) . The system is fixed-length , meaning…
Tumbler 40 oz handle replacement. Fasteners: 1x M4x16 mm Allen Screw (SHCS) 1x M4 nut (nylock) Material: PLA, PET-G, ABS, ASA etc. Layer high: 0,3 or lower. No supports needed.
I made an improved version. You can find it here . The parts should be interchangeable, so if you already printed this, you can use the new base with the old tops and vice versa. --- If your cats are anything like mine, any toy including…
Show off your personality with this Wifey straw topper , the perfect companion piece to the Hubby topper. Whether for everyday use, bridal showers, or just as a fun accessory, this design is both functional and stylish. 📏 Lightweight &…
Organization Rack to hold 5 yeti and similar tumbler/cup lids. Will fit Yeti and similar style tumbler lids up 4.25" diameter and 1" tall Can be used flat or standing. Print in the STL preview orientation 2 walls and 3 layers top/bottom.…
I know this seems like putting a hat on a hat, but I work in a dirty plant and I got tired of drinking dirt. This snaps on top of the tumbler cap. I included the Fusion file in case you wanted to print a logo into the Dust Cap.
I designed this tumbler turner at the request of my partner. However I wanted to do something a bit different than I have seen before. I created an interlocking turner and integrated stand/storage that is indefinately extensible. The…
Rings slide over the original print on each side of the spool. Print 2x for every desiccant holder.
A simple, extendable, rock tumbler / drum polisher machine. The length of the machine (and therefore capacity for tumblers) is dependent only on the length of your conduit and baseboard, although you may need supports for longer builds.…
Your cat has to roll this puzzle around to get to the treats. Different end-caps and inserts allow for many difficulty levels. Standard PLA settings have been used to print this. For assembly cut 9 strands of filament to about 9.5 cm and…
Printed with transparent PLA. Standard settings: - layer hight: 0,2mm - infill: 15% - no brim, The drill bit designed foot of the glass is based on a real core head design used for drilling cores from great depths. Toghether with a good…
