Ortur Rotary Tumbler Guide

This is a remix of the "Tumbler Guide for Ortur Rotary Attachment" by jnemes.

I basically just went in and added some support structure to make the parts a little more stout. The dimensions remained the same as far as attachment goes. It will assemble the same way.

Here is what you will need to print:

Pulley_Mount x 3

Flat_Riser x 1

Horizontal_Support x 2

Angle_Riser_A x 1

Angle_Riser_B x 1

Here is the additional hardware you will need:

POM wheels/pulleys x 3

M4 x 8mm (or M4 x 12mm will also work) x 16

M4 x 20mm x 3

M4 nuts x 19

Thank you, jnemes, for sharing the original tumbler guide.

https://www.thingiverse.com/thing:4582299

Print Settings

Printer Brand:

Creality

Printer: 

CR10S PRO

Rafts:

Doesn't Matter

Supports: 

No

Resolution:

0.2

Infill: 

30%

Filament: Sunlu PLA+ Silver

Category: Parts