Ortur Rotary Tumbler Guide
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a remix of the "Tumbler Guide for Ortur Rotary Attachment" by jnemes. I basically just went in and added some…
- Ocena
- 4 / 5
- Polubienia
- 38
- Pobrania
- 143
- Wydruki
- 2
- Wyświetlenia
- 1775
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution
This is a remix of the "Tumbler Guide for Ortur Rotary Attachment" by jnemes.
I basically just went in and added some support structure to make the parts a little more stout. The dimensions remained the same as far as attachment goes. It will assemble the same way.
Here is what you will need to print:
Pulley_Mount x 3
Flat_Riser x 1
Horizontal_Support x 2
Angle_Riser_A x 1
Angle_Riser_B x 1
Here is the additional hardware you will need:
POM wheels/pulleys x 3
M4 x 8mm (or M4 x 12mm will also work) x 16
M4 x 20mm x 3
M4 nuts x 19
Thank you, jnemes, for sharing the original tumbler guide.
https://www.thingiverse.com/thing:4582299
Print Settings
Printer Brand:
Creality
Printer:
CR10S PRO
Rafts:
Doesn't Matter
Supports:
No
Resolution:
0.2
Infill:
30%
Filament: Sunlu PLA+ Silver
Category: Parts