Alternative three-part box for Rocco's Vault with Pin Tumbler Lock
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Original box divided into three parts. This way, the box is easier to print.
- Rating
- 0 / 5
- Likes
- 46
- Downloads
- 120
- Makes
- 0
- Views
- 1,206
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I split the original box into three parts. This makes it look a bit fancier and requires slightly less material.
However, the main reason for this measure was that I often encounter issues when printing large solid parts—they tend to crack. The three-part version is easier and less risky to print.
The three parts can be easily glued together.
Printing information
All STL file are correctly aligned.
box back
Layer height: 0.20
Infill: 100%
box ring
Layer height: 0.20
Infill: 10%
box wall
Layer height: 0.20
Infill: In the range from 0 to 6mm, I used 15% infill; above that, 0%.
I am looking forward to your Makes! :-)
If you like this design, feel free to check out my others here.