Alternative three-part box for Rocco's Vault with Pin Tumbler Lock
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Original box divided into three parts. This way, the box is easier to print.
- Ocena
- 0 / 5
- Polubienia
- 46
- Pobrania
- 119
- Wydruki
- 0
- Wyświetlenia
- 1202
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I split the original box into three parts. This makes it look a bit fancier and requires slightly less material.
However, the main reason for this measure was that I often encounter issues when printing large solid parts—they tend to crack. The three-part version is easier and less risky to print.
The three parts can be easily glued together.
Printing information
All STL file are correctly aligned.
box back
Layer height: 0.20
Infill: 100%
box ring
Layer height: 0.20
Infill: 10%
box wall
Layer height: 0.20
Infill: In the range from 0 to 6mm, I used 15% infill; above that, 0%.
I am looking forward to your Makes! :-)
If you like this design, feel free to check out my others here.