Mini Vault with Lever Tumbler Lock
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
100% Printed Parts - No Dowels or Bearings. Sized to Print on Prusa Mini (or larger printers, obviously)
- Rating
- 4.897 / 5
- Likes
- 2,062
- Downloads
- 4,536
- Makes
- 63
- Views
- 37,507
- Reviews
- 58
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This vault uses 100% printed parts and adhesive/glue - no bearings or metal dowels. It can be printed on Prusa Mini (and larger printers) and the entire box prints without support - the only exception is the key but it prints well with organic supports.
In the video, I used the following filament:
- Prusament PETG - Galaxy Black & Urban Grey
- Hatchbox PETG - Bronze, Gold, Electric Lime, Red
I used JB Weld Plastic Bonder as the adhesive in the video. Weights and rubber feet can be used, but they are optional:
- Rubber Feet - https://www.amazon.com/dp/B0BLN4TCPT?ref=ppx_yo2ov_dt_b_fed_asin_title
- Metal Weights - https://www.amazon.com/dp/B072JXSN9P?ref=ppx_yo2ov_dt_b_fed_asin_title
There are 2 versions of the box, Standard and Jumbo. They both use the same door, but jamb and box pieces are different and the files are clearly labeled - be sure to select the correct jamb and box files!
A few tips for the assembly:
- If multiples of a file are required, the file name ends with “-X#” with the number indicating how many should be printed
- For Example: "Bolt-X12" means to print 12 Bolts
- The following files have pieces which bend, so I recommend printing with PETG:
- Lock-Spacer1
- Lock-Lever1
- Lock-Lever2
- Lock-Lever3