Counting matching models…
Replacement level for the open/close function of a Bonavita "Wide Base Porcelain Immersion Dripper" coffee maker. Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: No Infill: 50 Filament: n/a PETG Category: Kitchen…
Faucet Knob Lever for external diamter 50 mm. 8 recesses. Now the faucet doesn't drip anymore.
Gridfinity Storage bin for Wago 221 lever nut connectors. Designed for drawers of Husky workbench model: HOLT5202BJ2, which mine has ~ 55mm of clearance from bottom to drawer above. I printed the inserts to allow an angle to assist in…
remix of oldcrazyeye wago mount, made for wago clone but should be able to use the real one
Battery door lever for the Olympus E-M5 III because it keeps breaking for everyone!! Remixed from @myxfit_28243 's model to fit the E-M5 III instead of E-M5 II Notches are raised by 0.5 mm to accomodate the locking lug + spring see pic 4…
If you like to use the " Mini Vault with Lever Tumbler " as a money box this inner box is recommended as internal storage. It can also be used to store various parts in the standard vault It solves the following problems: The vault does…
I made a big mistake and put my boards up, with half of them not being aligned with the other half… so had to push out a dozen or so inserts out. My thumb complained… so here's one with a little longer lever to go easier on the thumb :).…
Water Dispenser lever for KitchenAid and other fridges This lever allows for dispensing of crisp cold water using one hand. Tested on KitchenAid model KBFS22EWMS but the same model is branded under Whirlpool and Frigidaire. Bracket part…
Ergonomic grip clamp for most motorcycles, can be clamped into place with a ziptie. Printed in PETG. no supports. 50%-80% infill
Clever Joker card from Balatro Not really a fan of how the colors came out on this one. STL is still fine All credit to LocalThunk and Balatro for the design
ENG: Tired of the timeless Italian design of the fuel tap on your moped? We have a solution for you! An honest Czechoslovak tap in a modern plastic design! The model is based on the tap from the Jawa 23 Mustang and Babetta 207, which…
Spare lever for a hazet 9040-4 air gun. Center hole with D2.5mm. Drill it up to 3mm if you want to use the original bolt or use a tap to cut a M3 for a screw.
The lever for the pull switch in our Winterwarm bathroom heater broke. I designed a similar piece ("WinterWarmSwitchLever"), printed in ABS and fitted - it seems to work for now, but given the original failed I made a quick “robust”…
This vault is small enough to print with the Prusa Mini and has a 6 Lever Detector Lock with warding and curtain, setting a new standard for 3D printed locks. It's easy to open with the key, but picking this open is extremely difficult.…
This is a complete re-build of the laundry detergent lever by PeaRidgeHillbilly. I think that the little button on the top of the laundry jugs spouts are hard to push, and this idea was great. Many have arthritis, and find ordinary items…
I couldn't find the Throttle Lever for a lost CH Products Flight Yoke, just the Mixture and Prop Levers were available. I printed it in Polymaker ASA normal settings without supports.
I created, the lever for the height adjustment. If you want to change something, just use the Fusion file.
All the parts are designed so that no post-processing is needed (removing supports, sanding...) and no external parts are needed (except for the belts). Happy printing By giving a vibratory motion to the lever secured to the semi-circular…
For those who like the finish of the printbed more. I made this version so you can have the imprint of your bed on both sides of the wallet. Only support you should need is inside of the screw holes the sides should print fine.
I randomly found myself wishing that the SLAB had a ball detent system like many of SillyButts' other blasters(Not like it would be that useful, your hand keeps it closed already), but I realized that magnets are way easier. So this model…
These are replacement gaskets for standard cam locks & levers found on a lot of rv's and campers. Printed in TPU 95. They have a .75 ID & 1.00 in OD. And come in three thicknesses: .060 no notches .045 1 notch .030 2 notches Thicker…
This is a part for a SPECIFIC pistol kit ONLY: The SS80 80% Glock 43 Kit with the thin, interior triangular relief cut that allows the slide lock lever to shift laterally side to side, causing it to slide off of an empty magazine nub.…
Replacement for a GE electric kettle lever that broke, works really well, the original replacement I printed in ABS has been going strong for 5+ years. Recommended to print in ABS, PETG might work as well Print Settings Supports: Yes…
Gear selector lever for bicycles. The smaller diameter of the clamp is 36 mm. The bigger diameter is 40 mm. The clamp mechanism itself is 14 mm wide. For assembly you will need a screw and nut size M5. Print Settings Material: PLA Infill:…
BMX Rear Tire Lever use this to make replacing your rear wheel a breeze. I got tired of stacking tire levers, and made this- it pushes your tire back against the chain and keeps it straight while you tighten the rear axle bolts/nuts. I…
Add-on lever for the Switchbot Lock Pro knob. Tight fit of extender print requires a bit of force to install. Short and Long versions. Print as pictured. No supports needed.
I didn’t like the stock TCA flap lever — it lacks the normal A320 “lift to move” action, which led to accidental position changes. So I designed a replacement flap lever with a proper pull-to-move mechanism and tactile detents. It feels…
An Ergonomic Leverless Fightstick Case that doesn't require any print support, all parts 3d-printable. Additional Parts needed for a fully functioning controller: 4 x M10 screws + nuts (printable) 17 x 24mm Buttons 1 x 30mm Button 1 x…
3D printing settings: Printer Used: Anycubic Kobra S1 Combo Filament: Anycubic PLA+ Color: Black Sparse infill density: 50% Skirt Loops: 2 Layer Height: 0.16mm Nozzle Diameter: 0.4mm Preset: 0.16mm HQ Ironing: All top surface Support:…
This throttle lever is designed to replicate the look and feel of the Tecnam P-Mentor power lever, perfectly adapted for the Honeycomb Bravo Throttle Quadrant . It provides a more realistic flight control experience , enhancing ergonomics…
Frame sostitutivo per la cuffia della leva del cambio della Fiat Panda 141. Stampare in Petg o altri materiali resistenti al calore. Assolutamente sconsigliato stampare in PLA. 3D printable replacement frame for the Fiat Panda 141 gear…
Cantilever Tool/Sewing Box Remix (PLA-Optimized, Modular Joints) This remix of the popular parametric cantilever box features a key modification for easier, faster printing and improved stability, especially for PLA users. Key Features of…
**DISCLAIMER: I made this for my old style Abloy keys, so that version is the one that is tested to work with actual keys. I did find 3D models of some other keys and modified the models to accept those keys BUT I can not confirm how well…
WHY? I had the idea to make screw-together pins and holing the existing connectors. Knowing many people have the same ideas, I checked the remixes. So many thanks to the Modular Pins remix for doing part of the work, made fulfilling my…
Combined the Automatic lever adapter with the manual lever for the magnetic top mod. This one has a bit extra bracing to box the adapter for a bit more stiffness. Also swapped the open arrow on the manual knob. Features 10mm extension to…
V2 is here Hard mount the motors machined tensioner arms Better bearing retention much better IS results Easier to machine (except for the tensioner arms) General This design is based off of BRS Engineering's Lever M3. It's what I was…
Saw that no one had a throw lever mount that didn't use a screw, so I did. Uses a 5mm wide ziptie or smaller.
Description This is a custom lever designed for the Fox 36 and Fox 34 GRIP damper cartridge. It allows you to print the lever in a custom color to match your bike setup. The original sealing ring must be transferred from the stock lever…
For this part, I'd recommend using a stiff material. I went with PC Blend, yet regular PLA should also be fine. Supports are needed for one section, but make sure you have overhang threshold set to 30° since that helps to avoid…
This is a spare part replacement for the direction adjusting lever of my Bosch GSR 18-2. Original Part-No. 2 609 101 009. The part is mounted in many other Bosch tools. Printed with Prusament PETG. Due to the sloping surfaces, I printed…
I make this thumb for my tx controller dumborc X6PM-350. No support needed. 4 walls/8% Gyroid infill
You will need an M3 screw (7mm) and an M3 nut. You need to set a pause in the slicer to insert the nut during printing.
This is a shortened front end for the Levergun MK3 to allow a bcar to be fitted on the barrel. This however reduces the tube capacity to a 7 shell config. It mates perfectly with a 31cm barrel. Meant to use a gfz bcar or any bcar with…
A M3/M4 bolt (and nut) is needed. Expected bolt dimension: Thread size: M3, M4 Recommended thread length: longer than 20mm min: 15mm with 6mm height trusted washer Bolt head diameter: up to 8.2mm Bolt head height: up to 4.0mm
Replacement for the black lever you press to make the hippo go forward. Designed for resin printer, I recommend printing on its side (default orientation) for strength.
Best printed in ASA or PETG. If the fit is not tight enough the .SCAD file can be modified.
This model is designed for N Scale. For KATO Unitrack a specific Base is added. The minimum build plate size is 180x180 mm. H0 scale Cantilever Railway Bridge https://www.printables.com/model/1571076-cantilever-railway-bridge-h0-scale…
YOU WILL NEED THE KIT TO BUILD THIS: USA: Bearswares: https://bearswares.shop/products/vulture-mk3-by-mhp-arms?variant=42951208534129 Out of Darts: https://outofdarts.com/products/mhp-vulture-lever-action-springer-hardware-kit AUS:…
Made for the Siboor Kit that has this Lever connectors. You need 2 heat set inserts M3x4x5 Voron Standard.
A set of robust, interlocking bicycle tire levers designed for 3D printing. The levers clip together for compact storage and easy transport. I’ve successfully tested them on my own road bike, and they handled tight tires without any…
A knob for the lever that opens and closes heater vents. The knob fits on to a metal lever that has a mounting post measuring 7.2 x 1.5 x 7 mm. The knob may be difficult to press on, but that's by design. I had to find a flat metal…
This model is compatible with the lego system.
For increased durability, print the part in a horizontal orientation. Longer bolt is required for the installation
This model is designed for H0 Scale brands. Minimum build plate size is 256 x 256 mm. N Scale Cantilever Railway Bridge https://www.printables.com/model/1548384-cantilever-railway-bridge-n-scale Printing I printed with PLA, 0.16 mm layer…
Omlouvám se, nemám žádnou fotku jak pasuje. /Sorry, I don’t have any photos showing how it fits.
The fit might be a bit tight, so i would advise to clean the metal threads.
⚠ Concept / Reference Design – Not a Medical Device This model is provided as a conceptual reference design demonstrating an accessible lever-style mechanical approach to actuating a push-button , specifically modelled around the…
I found printing it on it's side gives the best stability for actual use. UPDATE: V3 works but knob was too close to housing, V4 fixes that.
Retrofit for the AERECO ZUROH 100 MD moisture-controlled external air vent or as spare part for the ZUROH 110 MD with lever. The lever in combination with drilling a hole into the cover converts the ZUROH 100 MD to the ZUROH 110 MD and…
The "Lever Blocker" prevents accidental activation of the levers. This is especially comes handy during setting up or solving the turing tumble puzzles where sometimes the levers are triggered by accident. Printing: supports: no Infill: 15%
Simple part to repair water kettle lid button
ENTER lever Typewriter Typewriter "ЛИСТВИЦА" (LISTVISA) Made in the USSR Plastic: PLA ~10.93g Layer height: 0.2mm Time: ~1h26m 3D priter: Creality Ender 3 S1 PLUS
This is a lever for a recliner release assembly which fits a cutout of approximately 70mm x 55mm. I had trouble with the cheap plastic lever and its Amazon replacements breaking, so I decided to reverse engineer it and print a…
Replacement security lever for Parkside miter saw / drop saw. I didn't have the original broken peace so it might not look like the original but it works. I did test prints in PETG and the final peace with a resin printer. PETG is strong…
Originally designed for CfMoto 450NK, but I have included a Fusion360 and STEP file so you can change the dimensions to fit your motorcycle. Printed in TPU
Hi All! The lever lock for my Hercules Mitre Saw Stand broke off and I could not find a proper replacement. After calling Harbor Freight, they do not sell replacements. I tried lever locks made for Dewalt and other brands but they didn't…
This was designed to hold the Waygo 221-2401 Lever Nut. It has a tab under the bridge across the connector to help secure it in place. It has enough clearance that the levers can be raised, but in the closed position, they should fall in…
Just add some remix for Syringe 18.5, 18.8, new straight lever with space for a longer screw 16mm and small chamfer to help to pass the TPU Gripper. just need to remove a small part on the top of the syringe like on the picture
I printed this in Colorfabb allPHA black with a 0.4mm nozzle & 2 wall loops
Open lever. Slides snuggly onto the open shaft. Print suggestions: PLA works prefectly 0.1 layer height for smooth surface 20% cubic infill 3 walls Nice first layer
Replacement winding lever for Bronica ETR Cameras. Uses a M2 Socket head and nut.
My Ultimaker 2+ started jamming a ton and I discovered that the extruder lever had warped at the bearing mounting point causing it to bind. Using the UM open source files I modded the lever arm to assemble with screws - making everything…
I needed a slight redesign for my direct drive extruder. Since my stepper design is different, I do not need a relief near the bearing mount. Derived from several excellent designs on thingiverse such as "QU-BD Extruder Modifications…
The lever / latch for the Ambiano / Aldi Stick Vac nozle
A replacement knob for the Baratza Encore. Inspired by https://www.printables.com/model/166703-baratza-encore-lever
I created this after not finding an existing SKÅDIS holder that fit my specific tape measure properly—most were either too narrow, too shallow, or oversized and loose. Perfect for organizing your tape measure on a SKADIS pegboard workshop…
Tired of using zip ties to bleed your front brakes overnight? Want an easy way to keep your brakes tactile and aggressive? The Lever-Grip is a simple, effective tool for bleeding front brakes. This holder locks the brake lever in place to…
I always have leftovers when doing layups on bigger Carbon fiber projects, and I hate to throw them away. I also had the issue of breaking off some tirelevers when trying to mount or remove my tubeless bicycle tires. So I decided to…
The mechanics of my Secwal wallet failed - wasnt able to push out the cards anymore. You can pry out the mechanics (use a knife or screwdriver and pry out the black plastic part at the bottom of the card storage). The button can be…
A replacement knob for the MG MCB seat lever (used one on each seat for folding / adjusting the seats) Print in finest resolution, and with adaptive layers. When printed in PET-CF, result and finish was amazing. Parts are printed without…
Part Description: Top (three sizes 25.4mm, 30mm 31mm ) to match with: bottom m5 flat simple mounting hole to attach to any surface with m5 screw bottom m5 square allows you to mount with a timed rotation to: frame mount bottom custom…
This is a sized down cantilever box fit for a Bambu A1 Mini. The original creator is Michal Fanta and his print can be found on Printables. I wanted to print this handy storage container on my A1 Mini while still maintaining the original…
Being right handed, i found it awkward to turn off the steam using the stock GCP knob. This design easily lets you turn on and off the steam function with just one finger. I designed the knob to have a little play. I found the best way to…
Updates 2/26/2026 Original model and upload 2/27/2026 Updated to include changes to the cutter macro for the Pico MMU Updated files to include longer versions that come down 4mm lower. The lever hits just fine on the originals, but it's…
Update - Feb 27, 2026 - fixed missing magnet recess in bin. Brass catcher for Henry lever action 22LR. Base fits into the dovetail at the top of the receiver and the pieces are held together with two pairs of strong N52 neodymium magnets…
Valve lever on a portable tire inflator broke off. Rather than schlep back to the auto parts store and buy another pump, I designed this replacement part. Add one M3 screw, washer and nylon lock nut, back in business. Use PLA or PETG with…
This is a heavy-duty replacement trigger (clamping lever) for one-handed quick-grip bar clamps. It was specifically designed to replace the fragile stock plastic triggers found on brands like Somar and Schulz, which often snap under high…
The MHP Vulture is a lever-action short dart spring-powered blaster remixed from MrHeathPants’ own Wrenfield MK-3 blaster design. Featuring a premium CNC-milled, black anodized aluminum lever and priming bars along with a unique…
I have two bikes with newer (~2024) Fox Float shocks. Both often end up with the climb switch set to locked when I had left it open. This cover adds a little extra thickness which makes it harder to move. Print with 1 wall and 0% infill…
Scope Throw Lever with a 42mm inner diameter. Loosely inspired from https://www.printables.com/model/507645-clamp-on-throw-lever-for-athlon-btr-gn2-scope but these don't fit my scope, so I completely design it by my own. The knurling and…
Inspired by Michal’s rail switch , I’m trying to create a mechanism that forces a train coming from the single track into one direction, while still allowing a train coming from the opposite direction to pass. This is version 0.1 and not…
