Counting matching models…
Made to fit snuggly so that it doesn't wobble. I also added some foam tape on the outside for even better fit. Confirmed fits 2015 Camry and 2019 Kia Sorento but should fit most 3.2 inch car cup holder. Probably should use filament with…
I designed this adaptor for the cupholder in my 2018 F150 to hold either my 14oz Yeti Rambler or 32oz Nalgene bottle to keep them from sliding around the truck. Should fit 2015-2020 Ford F150's and also confirmed to fit in the 2021 Ram…
A family member wanted an adapter for their cup holder so that it could hold their 14 oz Yeti Rambler and its hot coffee safe during their morning commute. A lot of the existing designs did not allow for printing without supports or…
This handle was modelled after the official Yeti Rambler 20 oz Tumbler Handle from this link, YETI Rambler 20 oz Tumbler Handle | Sport Chek . It has a slightly loose fit so that users can add electrical tape to the inside of the rambler…
Here’s a quick model for a 14oz Yeti Rambler mug (approximately 100mm diameter at the base). I couldn’t find one that worked for my needs, so I designed this to fit nicely in the 2024 Ford Escape cupholders. The model is based on the…
I print this cup holder with raft only. No support needed. The holder is offset so that two can be used together without rubbing each other. *Updated the design a little to have stronger cupping on Y-2.stl
I couldn't find a cup holder for my Highlander that also fit my new Yeti Rambler 64oz water bottle. Designed one in Tinkercad and it works great! Printed in ASA for UV and heat resistance (don't try using PLA for inside a car). PETG would…
A simple model that adapts the 26oz Yeti Rambler to the TF MkII Ford Kuga/Escape centre cup holders. I haven't test fitted in any other series of the Ford Kuga/Esacpe but it's possible the centre cup holders are the same size, if you…
There are a lot of Yeti handle models out there. I like the two-ring ones that support the tumbler at the top and below the beltline. This one prints easily with minimal supports. It screws together with a printed-in-place screw and it…
No supports needed. Recommended to be printed in PETG or ABS for thermals. It fits very snug in the cup holder of my grandpa's 2020 Dodge Ram Requires 4 m3 bolts to attach. Maybe some super glue between the parts if you want the extra hold.
This cap can be used to cover your YETI Rambler ® straw. It has a hole to let you attach it to the straw with a rubber band so the cap is always within reach. If you have problems with flying insects always wanting to share whatever…
Built to adapt my standard cup holder on my love seat to hold my 36 oz Yeti Rambler. Category: Replacement Parts
A spacer you can 3D print that lets you use the 16 OZ Colster with smaller sized 12 OZ cans. I added a string to it so it is easier to reach in and grab. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: Doesn't Matter…
Do you keep your rambler on the passenger seat only for it to roll away when you hit the brakes? Look no further for a bottle holder so you can drift through those corners. The hole in the middle is also tapered for easy drop-in of a…
Motorcycle scrambler cookie cutter. The mold consists of 2 parts. The outer part is used for cutting and the inner part creates the outline of details and contours on the cake.
A surround for the Speedometer/display unit. Note: This surround / binnacle. / cowl is designed with button cut outs and from measurement of the two button digital display as fitted from model year 2020 onwards (led headlight models)…
Yet another cup and bottle holder to fit Bugaboo strollers like the Fox 5, that utilize the “mushroom head” style accessory mounting points. This is designed to hold the YetI 30 ounce Rambler and smaller. Supports are not necessary, and I…
Ducati Scrambler Turn Signal Adapter for non-original blinkers
Slim, sturdy handle for 26oz rambler cup. Should fit well, but some M3 bolts allows for handle to be tightened securely. Model is a 2 piece design to avoid excessive supports. Required is 3x M3 sized heat set inserts and 3x countersunk…
Simple boot to protect the bottle of the 18oz YETI RAMBLER water bottle. Printed with 95A TPU
Simple adaptor to allow a Yeti Rambler mug to be held by the cup holder in a WK2 Jeep Grand Cherokee. Updated to not get stuck in the cup holder.
Large water bottle holder for clicgear (v3 to 4.5) golf push cart inspired by the v4.5 clicgear water bottle holder. This was designed for a 9cm diameter by 25cm tall water bottle ( YETI 18oz Rambler & Thermoflask ). Printing Tips…
This is the final Yeti handle for now as it's the one I've settled on using every day for my 12oz Yeti. Instead of the “cup” design of my other yeti handles, this one sits between the lid and the rim of the mug, there's a rib on the…
The Yeti Rambler 10oz Lowball is a great tumbler to keep hot or cold liquid, but it's completely flush circular without any handle. It is also wider than most tumblers, making it a bit hard to grip comfortably for smaller hands. I have…
An angled adapter intended to securely and compactly fit 18 , 26 , and 36 oz YETI Rambler water bottles in a cup holder. Slots near the base of the angled section help the 18 and 26 oz sizes stay seated nicely without wobbling. Sized to…
This bumper provides protection to the bottom edge of your Yeti rambler, it could also easily be scaled in your slicer to suit any bottle type or size. It could be printed in any material, however, the intention was TPU. Print settings…
A handle for my Yeti 10oz Lowball. Just a single piece, needs printing with supports. Once printed just drop your mug in. I've added it in 2 sizes as it's bit snug (you could just enlarge it in your slicer if you find that easier) for the…
Bumpers are designed for the 36oz bottles. Bumpers helped save my old isolated water bottles from drops and dents. Yetis are expensive and I'd like to maintain it. Parts are 2 pieces. The bumpers are held on by friction and suction seal.…
Like the original model, this remix holds either a 14oz Yeti Rambler or 32oz Nalgene bottle. This is modified to attach to universal cup holder for cars that screws into place like this one . Printed out of PETG for better heat resistance…
Yeti Rambler Jr. to Veer Cruiser Tray Adaptor I created this little adaptor so that a yeti rambler jr could be used in the goveer kids tray that latches onto the wagon. This does not exclude it from being used for other size cups. See…
Protect your YETI Rambler 26oz bottle with these TPU bumpers designed for both the top and bottom sections. The bumpers safeguard your bottle from scratches, dents, and damage during daily use. Features: Custom fit for YETI Rambler 26oz.…
Reuploading this tumbler handle. Used PLA+, 0.4mm nozzle. With a fast print, it uses 26.5g filament and took about 1h12m. This handle is different than others listed due to the solid under side and long handle.
This is a straight driving ETV (Egg Transport Vehicle) for the 2015 division C Science Olympiad, Scrambler. It should be fully rules complaint but check dimensions before using this design. Note: At time of upload, the design has not been…
Tired of seeing all those fancy Stanley Cups with their fancy handles, I decided to add my own to my otherwise great Yeti Rambler. To increase rigidity, I decided to print this model upside down and at a 45-degree angle. To make this…
This is a steerable ETV (Egg Transport Vehicle) for the 2015 division C Science Olympiad, Scrambler. It should be fully rules complaint but check dimensions before using this design. Note: At time of upload, the design has not been tested…
remix of Yeti Rambler Cupholder Adapter to fit driver-seat cupholder in Honda Odyssey 2019
Features cushioned corners to absorb impacts. Printed with Duramic3D TPU (95A) on a Creality K1C. Print time ~4.5 hours. Dimensions: 50mm Tall 99mm Outer Diameter 96mm Inner Diameter 1.5mm wall thickness 4mm bottom thickness Recommended…
I wanted to fit my Yeti Mug into my cup holder and it was too big with the handle so I designed this holder. It fits a Prius Center console and also a Tesla. Print with no supports, maybe brim if you're worried about bed adhesion. I…
I wanted a way to use my nice 10oz Yeti Rambler cups in my 2018 WRX, so I made this adapter. Demo: https://streamable.com/kddy6 For this cup: https://www.yeti.com/en_US/drinkware/rambler-10-oz-lowball/YRAMLOW10.html Category: Automotive
While I made the model from scratch, I'm calling this a remix of theihdes's 20oz version. It was heavily inspired by it, so credit where credit is due. :) I couldn't find a 12oz version, so I made one. Print the top and bottom, invert the…
AMC Rambler Station Wagon 1969
A spacer for the 473ml Yeti Rambler so you can use it with regular size cans. I used this model as a base. Print Settings Printer Brand: Anycubic Printer: All-metal Mega Rafts: No Supports: No Resolution: 0.3mm Infill: 15% Gyroid…
I created this model using my own measurements of a yeti rambler and tried to be as accurate as possible. I hope that it helps others design their own 14 oz yeti rambler accessories.
A simple protective cover for the bottom of your Yeti Rambler. Works on the 12oz and the 18oz (pictured). Bottom of the cover is angled, not curved, for better printing. No supports required. Printed in 95A TPU at .2 in about 35 minutes.…
The cupholders in the Mazda 3 present some challenges for the YETI Rambler mug (14 oz). This adapter prints in two pieces and thread together, fitting nicely into the cupholder slot without restricting mug access. This adapter also…
I printed this with Amazon basics TPU. https://www.amazon.ca/gp/product/B07H9KNPNL/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1 Printed with supports everywhere (even though they are a pain to get off) This STL will need supports for…
I carry a Victorinox Rambler every day in my pocket. It is a fantastic little tool and I use it in all kind of situations. One issue I noticed however is that the knife picks up dust from my pocket, mainly on the hinges. Also, the plastic…
The Yeti coolers are great, but on their own they don't fit the slightly smaller San Pellegrino pop cans. This small insert/coaster fits inside your Yeti cooler and eliminates that problem.
Holder for Yeti Rambler 1 Gallon for the front floor area of a 2021 GMC truck. STEP file included if you wanted to modify it.
The cup doesn't fit perfectly but it's snug enough that the yeti won't come out too easily. Printed on my Creality Ender 3 V3 SE using eSUN black PLA+ I will add proper photos soon I used supports for the cup overhang, but I am new to…
I just needed a cupholder for these BIG Yeti rambler cups in the car. So I got my micrometer out and did some measurements and made one in tinker CAD. 8 versions later I have a working cupholder! I made mine at 15% infill for speed of…
Another handle for Yeti Rambler 12oz/18oz Hotshot (my origingal handle is here https://www.printables.com/model/619322-yeti-rambler-hotshot-12oz18oz-handle ) Best printed with supports. This is basically the same design as the handle I…
Printed with 1 wall at .6mm and low infill for cushioning.
Remixed from https://www.thingiverse.com/thing:4600530 This plug fits the drinking hole in the 16oz Yeti Rambler cup. GF Complained of the cup sloshing tea all over her car, so this is the easy solution. Works well! Print Settings Printer…
This is an adapter for the cupholder on a Tesla Model 3 to securely hold a 36oz Yeti Rambler water bottle. This adapter is designed to work with readily available silicone cupholder liners, and uses the three protrusions for a solid…
This is a cupholder insert for a couch factory cupholder to hold wide containers such as a Yeti Rambler 20oz thermos without tilting. It is snug in the factory cupholder by design yet still pops in and out easily and flattens the bottom…
A bit chunky, but wanted a handle for my Yeti Rambler. This one printed from PLA, the top and base are designed to be printed with the lugs flat to the bed. I used a brim when printing the top part as it's a snug fit, so any warping could…
Updated Owala Threads - I dropped the bottle and the adapter pulled out - so i added some extra width to the threads. This adapter allows you to use an Owala lid on a Yeti Rambler cup. I've also included the STEP files for the complete…
Parts to launch the ETV (Egg Transport Vehicle) for the 2015 division C Science Olympiad, Scrambler. It should be fully rules complaint but check dimensions before using this design. 2015/2016 redesign: To make it easier to launch the…
Printed out of PETG CF. Needed Materials: 4x M5*45mm Screw 4x M5 Washer 4x M5*10*7 (heat nuts) 4x M4*16 4x M4 Washer 4x M4*4*6 (heat nuts)
Have a Yeti Rambler 42oz mug? Ever drive with it in your car? Do you find that the sun sometimes shines off of the lid and blinds you while you're driving, making it difficult to drive, so you put your hand over the top, but then you…
I created this simple model as I accidently threw away the one that came with my cooler. This is a quick print and just spaces your can up a few mm for a tighter seal Place tapered side downwards
Prius V5 Yeti 18 oz. Rambler Cup Holder Adapter Problem: YETI Rambler 18 oz bottle is too large to fit in a Prius V5 front cup holder. Solution: make an adapter. Notes: Original cupholder is tapered (67.5mm at the bottom x 75mm at the top…
Similar to BMW-Motorrad Part No.: 32718558526
Our Coleman camp-chairs came with cup inserts that were too-small for almost all of our cups and mugs so I designed this as a replacement. This is the third revision after I kept getting bigger mugs for camping. Obviously this would work…
Custom 'MoccaMaster Cup-One' Holder for YETI Rambler Lowball. Made for the non-stackable / old version of the YETI Lowball Rambler 295ml / 10oz. Will probably fit the new / stackable 'lowball’ & 'stackable mug' with handle (both 295ml /…
A simple holder for the YETI Rambler 14oz version. Fits in the middle of the cup holder of the Skoda Fabia Mk2 (2007-2014). Print instructions: Lay flat upside down (big side down) Has to be printed with supports Settings: 0.15mm PETG…
This is a cup holder adapter for a Yeti Rambler camp mug. Fits standard car cup holders. Printed in PLA, 0.2 mm layer height, 15% infill. Will need supports, or cut the model and glue together. I included the step file for further…
The main dimensions are taken from the original parts. Only part 5 has been changed, but it can be cut manually if the original size is needed. Filling is 100%. Printed from PETG. It is important to print in the right direction - parts 5…
un carinissimo portachiavi per gli appassionati del marchio Ducati
This is a plug/cover for CVT hot air outlet hose during cleaning of Polaris Scrambler S / Sportsman S. Because of the direction and location of the original outlet in these models it is easy to flood the CVT mechanism and the belt. Just…
Print with black PETG with the z-seam at the bottom for best results.
The Yeti style mugs have an OD of 101mm (3 15/16"). The clever dripper is just a little too small at 95mm (3 3/4"). It works fine to just offset the dripper on the edge of the mug but this adapter ring is satisfying to use if you don't…
This is an update to my previous Yeti Rambler mug adapter. This was designed around the new Toyota Prius cupholder. Aside from these updates, it has also been widened to work with other travel mugs and cups without needing to remove the…
This is a taillight lens for a 1964 Rambler Classic 660 printed with petg transparent red, still dialing in the settings
lovely Ducati scrambler.... be careful with the side stand when removing the supports....
Motorcycle Pillion Seat Bracket Replacement Overview: A redesigned bracket to replace the conventional pillion seat holder, addressing common breakage issues at the nose section. Installation Guide: Remove original bracket carefully - cut…
I like to carry a small Swiss Army knife, but I don't carry keys and hate losing my knives. After discovering the very bright Warsun T7 pocket flashlight, I had the idea to attach a Victorinox Rambler to it. This is a little chunky, but…
Lavero simple scrambler ducati
Triumph Scrambler 1200 High Beam Remote Control Button. Slightly longer than original. PETG.
I wanted a way to dry my YETI Rambler at work and home without leaving it open to collect dust. I designed this drying stand and top hook attachment. I didn't need any supports but you might consider a brim for the point where the hook…
I was gifted a Yeti Rambler (Dick's) and none of the accessory lids fit. This is cover goes on top of the slip lid and makes more "leak resistant". I can't claim complete leak proof.
Simple clips that insert into the straps of the Yeti Bottle Sling for Rambler Bottles and attach it to the handle bars of a roller bag or spinner bag. Great for in the airport. Keeps your water secure and within easy reach. Pops off…
I was gifted a 20oz. Yeti Rambler (Dick's) and none of the accessory lids fit. This is cover goes on top of the screw top lid and makes more "leak resistant". I can't claim complete leak proof. Bonus is the cap makes it ALOT easier to…
I ride a Side by Side out in the dusty desert and found that my drink kept getting a thick layer of dust all over it and even after wiping it clean I could still feel the grit in my mouth so I made a simple dust cap printed out of TPU to…
Slim, sturdy handle for 26oz rambler cup. Should fit well, but some M3 bolts allows for handle to be tightened securely. Model is a 2 piece design to avoid excessive supports. Required is 3x M3 sized inserts and 3x countersunk socket head…
The rear fender on the HS2 braces rattled all the time. This brace was created to end the rattle.
This is a replacement part for the LL Bean Rambler Wagon. The part number is unknown, but its the part that connects the wagon body to the handle and has the bolt passing through it. Recommended to print in ABS, nylon or similarly hard…
POLARIS SCRAMBLER CHAIN GUIDE, BUILD IT FOR MY 2001 SCRAMBLER 500
Easy egg scrambler insert for wide mouth mason jars. Easily scrabble eggs without the mess. This insert fits standard 16 oz wide mouth Mason Jars and can simultaneously scramble up to 6 eggs per load. Simply crack desired number of eggs…
Use a rubbery type filament material, like TPU or TPE. Fits snug to the bottle and does not fall off. No, I do not share the design files. Use at your own risk.
A US license plate holder for the Ducati Scrambler 800. This was made for a 2015 Scrambler Classic model, but I believe it will fit other models of the Scrambler 800 with the same rear license plate subframe/mounting points. Utilizes the…
V outdoorové hře Geocaching se začínají objevovat keše (první vlaštovkou je keš GCBG22E autora Vosoni), které vyžadují dekódování postupových souřadnic novou metodou. Souřadnice lze samozřejmě dekódovat na papíře, mnohem zábavnější je…
An outboard heat shield for the right-hand exhaust on a 2019 Scrambler 1200 XC 2019-2021. It stands 12 mm off the OEM finned cover on the bolt that's already there, and the air gap is the whole thing - nothing on it touches anything hot.…
Instruction Manual and Video Available Project Manual A Project Manual has been created that takes you step by step through the process of converting the Estes Green Eggs model rocket in to our tribute of the Scrambler rocket. The manual…
UPDATE: The earlier print was too wide, so you could feel a little obstructed when putting foot down at lights or a stop. This version is much thinner and the lid opening is across the length, making it far less of a faff and more secure.…
This is a rigid, magnetic tank bag specifically designed to fit the contours of the Triumph Scrambler 1200 tank (fits all Scrambler 1200 X, XC, and XE models). I also do leatherwork so mine has leather topper, internal leather and soft…
This is an adapter or spacer for the bar ends of the BSA Scrambler 650. I bought some 'universal' bar end mirrors only to find that they do not fit on the bike. Without this adapter/spacer the accessories would only tighten against the…
Plug to close the hole in the Scrambler 1200 XC swingarm. Helps keep dirt and grime out mostly. Print in the softest TPU possible, lowest infill possible.
