Driver bit holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Bit holder for the spare belt hook screw ion your drill/driver. Holds 5 standard bits using the power of magnets! Once…
- Ocena
- 5 / 5
- Polubienia
- 38
- Pobrania
- 154
- Wydruki
- 1
- Wyświetlenia
- 894
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution
Bit holder for the spare belt hook screw ion your drill/driver. Holds 5 standard bits using the power of magnets!
Once printed simply press in the magnets, they are snug so may need a good shove.
This is to fit theright side of a driver, for the left simply mirror before slicing.
You will need:
5x 5mm diameter x 2mm tall Neodymium magnets.
1x mount screw.
For my Makita I used an M4x20 which is a shade long, 18mm would be better but you'll need to cut one down.
For Dewalt I believe they use M3 but check on your own tool.
Print Settings
Printer Brand:
Prusa
Printer:
Mk2.5s
No
Supports:
No
0.2
Infill:
20%
Filament:
Prusament PETG Galaxy Black
Category: Tool Holders & Boxes