Liczymy pasujące modele…
Small bit holder for use as screwdriver. It is made of ABS for more stability. There is a countersink at the bottom of the hole to press or glue in a 5x1 magnet. Under the following link you will also find a nut driver with the same…
This is a bit holder for all cordless screwdrivers (such as those from Bosch Professional) that have an M4 thread. The bits hold well and do not fall out even when upside down. However, they are not too tight, so they can be easily…
Gridfinity bins to click the Bosch Pick and Click modules / trays inside. The 2x2 Version is needed for long bits. The bins are ‘4u’s heigh and stackable. It's a very tight fit, so there's a hole in the bottom (to get them out if they are…
5x1x3 Gridfinity bitholder for unlabled mass short hex bit storage
Youll need 2x M3x8 panhead screws to attatch the assembely to your toolcheck. Printed in ASA, other Filaments probably also work. All parts are designed to be printable in an oreantation that gives them the most amount of strength. Watch…
Hi Everyone, In my profession, I work a lot on a ladder. Where I have lots of tools in my work trousers. Therefore I have designed a magnetic bit holder. Attach a keyring on your trousers. On the side you can put a bit extender. On the…
What is this? Modular bitholder and hook system for Festool impacts and drills (and possibly other devices). includes bitholders in multicolour and single colour options in for the right and left side plus a plate to be able to mount them…
This simple bitholder can carry up to forty 4mm (precision) bits in its two slideouts. It is large enough to not only fit the standard bits, but also nuts/sockets up to approx. size 5.5 or 7/32. Useful in small toolboxes or pouches. PETG…
I needed to create some cutouts of different bitholders for my portable toolkit and realized there weren't any CAD files for this available, so I quickly made some. It is a configurable design in fusion with some sizes that I needed. Just…
This is a Gridfinity stand for Wera bit holders. It was designed for 817R and 813R, but it should also fit other types if the grip size is the same. It can be printed without supports. Credits: https://thangs.com/designer/ZackFreedman
Magnetic Revolver Bitholder for Parkside PARS 4 A1 Electric Screwdriver This Magnetic Revolver Bitholder is designed to be a practical and fun accessory for your Parkside PARS 4 A1 electric screwdriver. It offers a smart and organized way…
The Bit holder will be secured with a small magnet (d 4 x 3) https://products.wera.de/de/werkzeuge_fuer_fahrraeder_und_e-bikes_tool-check_plus.html
Remixed from @Alvomane's bit holder, with expanded bit slots for easier access and removal.
Just a Bitgolder for the Parkside cordless screwdrive PARS 4 A1 Fits on the metal part in front of it.
Small bit holder for use as screwdriver. It is made of ABS for more stability. There is a countersink at the bottom of the hole to press or glue in a 5x1 magnet. Under the following link you will also find a nut driver with the same…
Precision screwdriver description: I didn't like the way most precision screwdriver felt (especially the end cap) so I made my own with a ball beared end cap using a 687 Bearing. I like the upper part of the LTT precision screwdriver,…
Jednoduchý držák na standardní bity - šestihran 6,3 mm (1/4"). Bity drží velmi pevně. Zamýšleno jako trvalý držák jednoho bitu, spíše než výměný adaptér. Výsledkem je miniaturní šroubovák. Osobně používám PETG kvůli pevnosti. Určeno pro…
ryobi quick turn screwdriver Bitsholder for ryobi quick turn screwdriver One model have 8x3 magnets embedded inside ( Do the layer change at 21 layer ( 4.20 mm ) ) And there is a "standard" model that dont use magnets Update: There was a…
This socket organizer is a customized version of Flo's Socket adapter holder design, modified to better suit my impact driver socket set. I had some issues opening and using their FreeCAD file, so rebuilt it in Onshape instead. If you…
The 3D model is a bit holder designed for the Einhell TC-CD 18/35 cordless drill, accommodating six bits. This model provides a convenient storage solution for bits directly on the drill. Designed for the specified cordless drill, it…
The 3D model is a bit holder designed for the Einhell TC-CD 18/35 cordless drill, accommodating six bits. This model provides a convenient storage solution for bits directly on the drill. Designed for the specified cordless drill, it…
Non stackable 4x2 Gridfinity toolholder for Hazet ratchet and bitholder with additional space for small stuff.
Non stackable 2x1 gridfinity bitholder for 29 1/4'' bits and one socket.
Two bitholders for 50mm bits with a satisfying click when closing the cap. The back of the cap can be used to emboss your logo or initials. You can see on the pictures how it looks with a logo but the uploaded files are blank. So you can…
I wasn't fully happy with all the bitholders for this tool that are out there so i designed a new one Category: Organization
Small bit holder for use as screwdriver with a countersink at the bottom of the hole to press or glue in a 5x1 magnet. Small nut drivers with which you can also screw in hard-to-reach places. This nut drivers also has a through-hole so…
Bitholder, Prints well in standard .4 nozzle .2 layers for 6x2mm Magnets
This holder requires 2x Skadis universal hooks: https://www.printables.com/model/323748-skadis-universal-hook This model is definitely not optimized and was made in a rush. Feel free to make it better! :)
Bei Höhe 2mm den Druck anhalten und (Ø5x1mm) Magnete eingelegt. https://www.amazon.de/dp/B0D2RJY2TK?th=1 Bumper am besten mit TPU Drucken (2x) und einkleben
Holder for 5 hex-bits for Bosch GSR 12V-32 easily fixed with included belt clip 5 optional magnets Print in PETG or stronger for best long-time use but PLA will do fine Minimal support needed for the opposite side insert 5 Magnets 5x2mm…
This Gridfinity model is a precisely fitting holder for the Wera Micro 4 mm bit holder and is perfect for organizing tools within the Gridfinity system by Zack Freedman . The bit holder rests securely in a horizontal position inside the…
This part connects the standard bit holder connector to the bit holder mount (10mm diameter cylinder). It only absorbs tensile forces and prevents your bit holder from falling out. You will need two M6 set screws for clamping. Printed in…
Bei Makita Akkuschrauber Den Gürtelhalter abschrauben und mit der Schraube dort festmachen
This model is a set of bit holders for 75 mm bits and normal bits. Both parts are 160mm by 100mm. It uses 5mmx5mm round magnets to hold each bit and 2 magnets to hold each longer bit. It is built to fit into a rugged box. The inner…
This is a bit holder for all cordless screwdrivers (such as those from Bosch Professional) that have an M4 thread. The bits hold well and do not fall out even when upside down. However, they are not too tight, so they can be easily…
This is a bitholder in stair-shape for easy access. Can contain 40 bits with an diameter of 7mm. The V2 is the new version with less filament used and smoother edges as in the video shown. (6.3mm from face to face)
Couldn't find a stubby screwdriver for bits so I bought a high quality Wiha bit holder and designed a handle for it. one model for 28mm long bit holder and one for 40mm. Print upside down without support.
Allgemeines Schraubendreher Griff zur Verwendung mit handelsüblichen 6,35mm 6-Kant Bithaltern Druckeinstellungen Drucker: Prusa MK3s Schichthöhe: 0,20mm Infill: 15-25% Gyroid Vertikale Perimeter: 3-4 Decke- & Boden Schichten: 3-4…
A compact remix/add-on holder for the Wera BC 7 bit set, designed to securely carry a Wera 813 bit-holding screwdriver alongside the original case. I wanted a cleaner way to keep the driver and bit set together instead of rolling around…
Just a quick and dirty Screwdriver bit holder for my Tayg TrailBox 59. It fits up to 25 bits upright plus all you need in the box. I hope you enjoy it.
A stand for hex shanked drill bits This is a remix of hex bit holder by Fitzterra ( https://www.thingiverse.com/thing:1686330 ). However, this remix evolved until it is now almost completely, but not entirely, unlike the original, and has…
Just to keep them together.
This is a Skadis Holder for the Wera 817 Kraftform Kompakt Screwdriver/Bitholder. It is mounted to the Skadis Board with the famous Universal Hook from CSD_Salzburg . The Design is inspired by the ikea skadis wera mini grips holder from…
Box zum Aufbewahren von bis zu 6 Bits. Diese können auch außen eingesteckt werden, so dass die Box selbst als Schraubenzieher verwendet werden kann.
This is a Skadis Holder for various Wera Screwdrivers/Bitholders. It is mounted to the Skadis Board with the famous Universal Hook from CSD_Salzburg . You can mount e.g. the following Drivers from the Kraftform Kompakt Series but others…
Magnetic Bitholder for 4 and 6 mm bits I needed some way to organize and easily access a bunch of bits for my lab so I made these holders that stack neatly and also feature a totally unnececary magnet for that super satisfying CLACK! when…
Customized version of https://www.thingiverse.com/thing:2481453 Created with Customizer! https://www.thingiverse.com/apps/customizer/run?thing_id=2481453 Instructions Using the following options: nx = 10 ny = 5 spx = -1 spy = 4 bhh = 7 bh…
Inspired by https://www.printables.com/model/217722-dremel-box-organiser-gridfinity-based It was a little large so i created my own which is 1x1. Tolerance should allow for easy access to sanding bits (12.5mm) Holds 6 sanding bits
Keychain bitholder! A friend of mine asked me for a bitholder he can use on his keychain. So this is my version of a bitholder. You can use it on your keychain or on your work pants. My recommended settings: Filament: TPU Layer height:…
You are doing me a big favor by clicking the Like button :-) Print with 100% infill. Glue round magnet 6 x 2 mm in the bitholder.
Easy to print. Added two versions with 12 pieces in two different sizes. 6.5 and 6.6 indicates the distance between the flat sides of the bit. Means 6.5 is a tighter fit than 6.6. As an addon to : Container box, 80x120x20mm, V2, pallet…
Easy to print. Added two versions with 12 pieces in two different sizes. 6.5 and 6.6 indicates the distance between the flat sides of the bit. Means 6.5 is a tighter fit than 6.6. As an addon to : Container box, 80x120x30mm, V2, pallet…
Print with 85A or 95A hardness TPU. Model was printed with Ninjaflex (85A). Scale the model until the fitment of the bits is good.
A bitholder for Bosch Professional 18V cordless srewdriver. You need additionally four 8mm diameter magnets. Printed in Spectrum PETG. Be aware to only use supports below the horizontal stabilizer and not where the magnets are placed!
This is a bit holder I designed that is inspired by Scott Yu-Jan's design. It holds up to 8 hex bits and can hold on your fridge. What do you need? 8 6x2mm Magnets Any kind of Glue to hold the Magnets in place Prints without supports and…
reduced the diameter of the supports to make it compatible to the 6mm Dremel sanding bit it is possible to add media to increase storage capacity
1 Version adds 8 8mm holes for magnets in the bottom, the other one adds 10. Both available as stl and 3mf
This Bitholder holds 24 Bits. It was made for the LTT screwdriver bits which are 2cm long, but it would fit every bit upto a length of 2,3cm. You will need a metal rod with a diameter of 3mm. I used a m3 threaded rod and two nuts on both…
Makita Magnetic Bit Holder for Makita 18v with magnet during work, the hand does not touch the bit Neodymium magnet used 20x6x2mm -2pcs or 20x12x2mm - 1pc Bolt M4 16mm This magnets are also used in Prusa Lack enclosure ;)
These are two remixes of the bit holder insert for the Miniware ES15 cases from 3DP-MAMSIH , 51m0 and PjotrStrog . The bit holder allows 55 bits to be accommodated in the case. The version with the magnetic/finger recesses holds 47 bits.…
This is a small charging station / bitholder for a mini electric precision screwdriver I got from amazon. When the screwdriver is fully seated in its holder, it charges via USB power. There are also spots to hold up to 20 precision (4mm…
Cant find any bit holder in 6mm like mines, so made one. Hope someone like it and find it useful. Thanks!
Bitholder for 32 long bits and Hexagon Bitholding Screwdriver Hexagon Bitholding Screwdriver is for Wera 816R or 817R The bits should be at least 75mm long, for example KS-Tools 911.7550
ATTENTION: This is an accessory for the “Definitely Not LTT Screwdriver” found here: → https://www.printables.com/model/580045 (Fancy version) → https://www.printables.com/model/580064 (Simple version) I included a .dfx file so you can…
Print this bitholder with TPU stock settings prefferably pretty light on the number off walls and infill. you can mount it to the side using an 4mm hex bolt with a cilinder head on it. Does not fit both sides but you can mirror it if you…
Keep some emergency mini bits and screwdriver on you with this keychain! Holds 5 4mm precision bits. Snaps nice in the holder thanks to a 5*5*5mm magnet. The same magnet keeps the bit in place when using it. Screw is a pc-case screw, any…
MK4, .4nozzle, .2layer height, prusaslicer with input shaping
Dimensions of the screwdriver attachment provided in the images above (in mm).
I made a remix to 'Parametric Box V2' so it could be used to organize your bits.
You can find the screwdriver kit on Amazon. (https://www.amazon.de/dp/B09NPW9LNW?psc=1&ref=ppx_yo2ov_dt_b_product_details)
I prefer the rectangular bit pockets over the hex pockets. 1x2 size for regular bits. The 2x2 container is for small 4mm bits ('ifixit size'). Then there is a 2x2 holder with a stair profile for longer (75/100mm) 1/4inch bits. The pockets…
BitSticks for every reason… HAPPY BIRTHDAY version MERRY XMAS version U R THE BEST version MAKERTEAM version I LOVE YOU version BLANK version (for own prints or engravings) This ultra-compact bitholder and screwdriver holds up to 4 bits…
may be needed to pres bitholder in with some hitting/worming up the handle there is new version of pivot
The model can be printed without supports, if you place the face downwards.
As I searched around and could not find something already existing which fits my needs, I created that holder for the LTT Stubby Screwdriver – Linus Tech Tips Store (lttstore.com) and some additional bits, because I was also tired of…
The 3D model is a bit holder designed for the Einhell TC-CD 18/35 cordless drill, accommodating six bits. This model provides a convenient storage solution for bits directly on the drill. Designed for the specified cordless drill, it…
This is made for Luna bitholder but i added the STEP-file so you can change it if you have another bitholder. Printed in 4 perimeter 0,10mm layer with Prusament Jungle Green PETG Hope you like it.
I wanted a way to hold bits on my shop wall for easy acces. My Irwin impact bits case had little bitholders inside of it that came off. These smal dovetail bits are a perfect way to solve my problem. Easy and fast print to hold my bits on…
I wanted to have a clip for storing my LTT screwdriver with aditional bit holder, that I can remove and use separately. So I used these 2 designs and modeled aditional part for mentioned clip to have a bit holder at the same place in my…
This is a bit holder that holds 6 bits for the Milwaukee M12 Fuel Impact Driver 2553-20 as well as the multidrive M12FPDX. It screws in place where the normal belt clip goes. Could work in other materials, but I found flex/TPU having the…
hello you! I designed this bitholder in 2021 and thought I might as well finally share it with the internet! The bitholder can hold up to 20 (4x5 ) bits, two long bits and a magnetic bit holder for your screwdriver. notes on printing:…
I like to keep my bits on driver, b/c i don't need them when i'm not using it. I have a set of longer bits that are difficult to carry around in pockets or belt and i tried to ziptie them to a drill, with little luck. Only mounting point…
15 mm thick bitholder about 60 mm diameter for tight spaces. Extra hole for a cord to prevent tool falling. Printed in PETG. Ideal to use any bit in narrow slots with reasonable hand-applied torque.
Compact design for Bit and Bitholder Storage. if the fit is to tight, adjuste the extrusionmultiplier or increase the scale. I cecommend a smooth not rough Filament, otherwise the bits can jam into the holder. happy printing :)
I needed a bitholder for my Parkside impact wrench, I have missed it since I have one for my Makita drill… Holds 5 bits, secured by 2x6 mm magnets. Glue the magnets if needed… Printed in PETG, 3 walls, 15%infill. Use supports for the pin.…
