Magnetic Bitholder for 4 and 6 mm bits
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Store, Organize and easily accsess all your favorite bits. Features optional magnets for extra satisfaction.
- Ocena
- 5 / 5
- Polubienia
- 39
- Pobrania
- 278
- Wydruki
- 1
- Wyświetlenia
- 1356
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Magnetic Bitholder for 4 and 6 mm bits
I needed some way to organize and easily access a bunch of bits for my lab so I made these holders that stack neatly and also feature a totally unnececary magnet for that super satisfying CLACK! when putting them back.
There are two versions each holding 15 bits of either the 4mm or 6mm variety. Optionaly you can put in 3mm long and 3mm in diameter round magnets from the back. You can find them on Aliexpress, Amazon etc. To install them just put the holder face down on a table, take a 4mm bit or similar, attach the magnet to the end of it, put it in the hole on the back and give it some gentle taps with a hammer untill they are properly seated. Quick, easy and no messing about with glue.