Bitholder 2x3 and 2x5 for 50mm bits
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Bitholder for 50mm hexbits with a satisfying click when closing the cap
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 39
- Wydruki
- 1
- Wyświetlenia
- 309
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
Two bitholders for 50mm bits with a satisfying click when closing the cap.
The back of the cap can be used to emboss your logo or initials. You can see on the pictures how it looks with a logo but the uploaded files are blank. So you can create your own customized version if you like.
To connect the cap to the body you need 2 times M3x6 screws.
There needs to be a tiny gap when inserting the screw, so do not tighten it fully. Just play a little with the tightness of the screws until you are satisfyied with how the lid opens and closes.
First time inserting the bits might be a bit tight but for me it is just the right tighteness after a few times.
For best rigididy place the cap parts with their back flat on the buildplate, no supports are needed for any of the parts.