Bitholder 2x3 and 2x5 for 50mm bits
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Bitholder for 50mm hexbits with a satisfying click when closing the cap
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 39
- Makes
- 1
- Views
- 309
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial
Two bitholders for 50mm bits with a satisfying click when closing the cap.
The back of the cap can be used to emboss your logo or initials. You can see on the pictures how it looks with a logo but the uploaded files are blank. So you can create your own customized version if you like.
To connect the cap to the body you need 2 times M3x6 screws.
There needs to be a tiny gap when inserting the screw, so do not tighten it fully. Just play a little with the tightness of the screws until you are satisfyied with how the lid opens and closes.
First time inserting the bits might be a bit tight but for me it is just the right tighteness after a few times.
For best rigididy place the cap parts with their back flat on the buildplate, no supports are needed for any of the parts.