1 / 2
Freedom New Haven Aluminum Fence Post Plugs — zdjęcie 1
1 / 2

Freedom New Haven Aluminum Fence Post Plugs

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Various plugs for the aluminum fence gaps/openings

Ocena
0 / 5
Polubienia
0
Pobrania
11
Wydruki
1
Wyświetlenia
56
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution

All measurements on the provided CAD files are imperial (inches).

Recently I needed to insert a gate between two fence posts where one was already cemented into the walkway.  The aluminum fence had to be cut for shorter length, however the holes where the fence inserts into the post were left exposed.  I created these little “plugs” to close the holes so it looks more natural with the post.

The rectangular version is intended for opening where the fence slides into.  The little wings on the sides allow the object to be clipped in.  Inserting requires some push force while tilting to one side.  Removal requires a flat head tool (screw driver) to pop out (may get damaged) but these objects are quick and small to print.

The circular versions are a custom made screw shaft to plug the screw holes on the side of the post depending on the screw that was used.  The thread length on both versions are 1/64" however, the small version inner cylinder diameter is 1/8" and the medium version inner cylinder diameter is 11/64".  These are small enough to use finger strength, however plyers can be used if necessary.

Printing details

All versions recommended PETG or PETG+ to provide more durability.  All were sliced on a MK4 with MMU3 and PrusaSlicer (Single Color).  Print both as is from importing (no rotation necessary).

Rectangle Plug:

  • .20 or .15 profiles
  • No supports should be required although supports can be painted in between for the little winged overhangs
  • At least 20% Infill

Circular Plugs:

  • .10 profile
    • .15 can be attempted, however the screw threads may not come out as nice
  • No supports
  • At least 50% Infill
    • Anything less and there is risk of breaking the inner cylinder from the cover (head)

CAD Files

All CAD files are fully parametrized with descriptions of each value.  Modify as desired.

Rectangle Plug:

https://cad.onshape.com/documents/a794736a43e2aa59a3c63eb3/w/f1d5c39ec590d6980fbfed7a/e/3c14854eaba01bd7b367f0e4

Circular Plugs:

https://cad.onshape.com/documents/adf247fbe97532fc35e24370/w/de8b0bd8d71f7ab1e8efe683/e/80dd63105901f3f815502e40

 

Tagi