FlashForge Adventurer 5M Handle Pack 2
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A collection of 3 different handle sets for the Adventurer 5m enclosure. Top Lid and Front Door.
- Ocena
- 5 / 5
- Polubienia
- 162
- Pobrania
- 748
- Wydruki
- 9
- Wyświetlenia
- 3615
- Oceny
- 7
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Overview
A variety of handles for the Adventurer 5M. Both front door and matching top lid handles are available. Three 5mm x 3mm magnets are required per front door handle. The handles use the same 2.9mm screws from the enclosure kit. Magnets are a tight press fit. A small pair of pliers can help press them in, if needed. Add a bit of super glue for extra strength. The skull handle requires an additional 3mm x 6mm or 8mm screw to affix it to the base; a bit of super glue helps as well.
Printing
Handles are already in their intended print position, each file will have support instructions if required. Any questions just ask. The skull front door handle requires 2 printed parts, and a 3mm x 6mm/8mm screw.
Nozzle: .4
Filament: PLA/PETG
Layer Height: .2
Supports: Yes, See each individual file description.
Take a look at my First Handle Pack or any of my other Adventurer 5M Add-ons
Like my work?
❤ a few of my models
or