1 / 1
VW Golf MK 3 Variant (Station Wagen) Rear Axle Bushing press Tool
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Press Tool for inserting the bushing of the rear axle from a VW Golf 3 Variant/Station Wagon.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 38
- Wydruki
- 0
- Wyświetlenia
- 331
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Public Domain
Press Tool for inserting the bushing of the rear axle of a VW Golf 3 Variant/Station Wagon.
Two pieces required, plus:
- 2 pcs 50mm o.d. Washers for M12, (strong ones, t ~3mm) or a combination of washers to distribute the load/pressure
- 1 threaded rod M12, ~250mm
- 3 Nuts M12
- Grease for thread and bushings
Nothing more to add here. If you don't know how to use, you most probably don't need it.
Print: Extrudr ASA DuraPro, no supports. 30% Infill. But PETG should be Ok too.