Canyon Aeroad Garmin Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Garmin Mount for the Canyon Aeroad (2023) Model Thanks to @TimAngus for the great Base Model.
- Ocena
- 0 / 5
- Polubienia
- 30
- Pobrania
- 449
- Wydruki
- 0
- Wyświetlenia
- 2461
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Garmin Mount for the Canyon Aeroad (2023) Model.
nedded Prints:
- 1x AeroadGarminMount
- 1x garmin-interface-spring
- 1x garmin-interface-lockring
- 1x assembly-tool (only for assembly)
other needed Material:
- 2x M4x14 Screws (or similar length, with socket head or similar)
recommend Print Settings:
- Perimeter: ≥ 3
- Material: PETG (for better durability and strength)
- Support: Organic, only on Printbed (Support only need vor Mount itself)
Total weight with 3 Perimeter: ~25g
For help to assembly of the printed Parts you could watch the video of the original Model https://www.printables.com/model/156670-3d-printing-friendly-garminwahoo-interface
Thanks to @TimAngus for the great Base Model.
Pay attention to the information on the maximum permissible torque of your Cockpit! For example: on my CP0018 Cockpit its 2,5Nm. Do not use screws that are too long. Otherwise the cockpit may be damaged. Do not use screws that are too short. Otherwise the mount may fall off.
For detailed instructions on how to install a cockpit mount, take a look at the Canyon manual.