1 / 6
Creality K1/K1C 12mm chain riser and PTFE tube guide — zdjęcie 1
1 / 6

Creality K1/K1C 12mm chain riser and PTFE tube guide

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Combined the 12mm chain riser and PTFE tube guide mods

Ocena
4 / 5
Polubienia
119
Pobrania
786
Wydruki
2
Wyświetlenia
3752
Oceny
2

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike
Minor update:

Still works if you've installed the CFS kit!

 

Original Post:

The chain riser was one of the first mods I printed and used. I quickly upgraded my printer with the frame riser extension, and the included chain riser didn't have a PTFE tube guide. So I combined the two mods and decided to share them with you all. I hadn't yet touched any CAD software when I made this, so it was all remixed within the slicer. Enjoy!

Instructions can be found on the original chain riser mod page. This mod is fully compatible with the original riser, so you'll only need to print the top piece if you already have the original.

The upper riser is printed with normal supports

BOM
  • 2x M3 heat set threaded inserts (L4mm x D4.2mm)
  • 1x M3x6 countersunk screw
  • 1x M3x8 countersunk screw

Tagi